NUVO Lighting 65-863-5 LED Area Light Type V, 150W, Bronze Finish, 5000K, 277-480V

The 65-863-5 is a high-voltage fixture, rated 277V to 480V. That covers 277V line-to-neutral on a 480/277 wye service and 480V three-phase feeds, which is what most parking lots and industrial sites run. It will not work on 120V or 208-240V circuits, so if your pole circuit is standard low voltage you need the 120-277V version of the fixture instead.

A slip-fitter mount comes with the fixture, so it slides onto a pole tenon or a mast arm end and clamps down. If your pole has a flat square side with a drilled arm pattern rather than a tenon, you need a separate arm or adapter, since nothing in the carton bolts flat to a pole face.

Yes, it is an outdoor fixture with a Wet location rating and a cULus certified listing, so direct rain and snow exposure on an open pole is within its rating. The housing is die-cast aluminum.

Type V throws light in a symmetric circular or square pattern all the way around the pole, so it suits open parking lots, courtyards, and center-of-lot poles where you want even coverage in every direction. Type III is asymmetric and aimed forward, which is what you want on a pole at the edge of a lot or along a roadway so light does not spill onto a property line. The NUVO 65-863-5 is the Type V version at 150W and 19,736 lumens.

At 19,736 delivered lumens the 65-863-5 is in the range facilities typically use to retrofit 320W to 400W metal halide shoebox heads, since an aged MH lamp delivers far less than its rated output. Color is 5000K at 80 CRI, which reads noticeably whiter and crisper than the greenish shift of an old metal halide lamp, and rated life is 50,000 hours so relamping trips go away.

Fixed at 5000K. This fixture is not CCT selectable, so there is no field switch for 3000K or 4000K. If you are adding to a lot that already runs 4000K heads and you want them to match, order the 4000K version of the fixture rather than this one.

Yes, the 65-863-5 is dimmable, which is what lets it be put on a scheduled or occupancy-based curfew step to cut overnight load in a lot. The dimming driver leads are the connection point; no photocell or control device is included with the fixture, so order that separately if the site needs dusk-to-dawn switching.

The head measures 20.71 inches long, 12.4 inches wide, and 3.11 inches high, and weighs 8.08 lbs. That low profile and light weight keep the EPA load modest on a single-head tenon, but on multi-head arrangements add each fixture's area and weight before signing off on the pole.

The LEDs are integrated, with no lamp base and nothing to unscrew. There is no bulb to stock or replace, so maintenance planning is fixture-level: rated average life is 50,000 hours, and at end of life the head gets swapped.

Yes. Lead is identified as the Prop 65 chemical for this fixture, which matters for California public-agency and school procurement paperwork. The fixture is also RoHS compliant.

Bronze is the only finish offered on the 65-863-5. Bronze is the standard match for most existing parking lot poles and shoebox heads, so a replacement head blends with the rest of the lot without repainting.