NUVO Lighting 65-865-5 LED Area Light Type V, 200W, Bronze Finish, 5000K, 277-480V

The 65-865-5 is a high-voltage fixture, rated 277V to 480V. It will run on 277V, 347V, or 480V circuits within that window, so it suits commercial and industrial services. It will NOT work on a 120V or 208/240V feed - for a standard 120-277V parking lot or site circuit you need the multi-volt version of the fixture, not this one.

Type V throws light in a symmetric circular or square pattern all the way around the pole, so it is used for pole positions in the middle of a lot, open yards, and storage areas where you want even coverage on every side. If the pole sits along a property line, a building edge, or a roadway where light spilling backward is a problem, a Type III (forward-throw asymmetric) distribution is the better choice. At 200W and 26,536 lumens, this one is sized for larger open areas rather than a small pad.

A slip-fitter mount ships with the fixture. That means it mounts over a round tenon or a horizontal pole arm of matching diameter rather than bolting flat to a square pole. If your poles are drilled for a direct arm mount or you need a trunnion or wall bracket, that adapter is not part of this package and has to come from somewhere else.

Wet location rated and cULus certified, so it is approved for direct exposure to rain and snow on poles in open lots. The housing is die-cast aluminum. It is an outdoor fixture only.

No. The 65-865-5 is fixed at 5000K and is not field selectable, so there is no switch to set it to 3000K or 4000K. If your existing site fixtures are a warmer color temperature, this one will read noticeably cooler and bluer beside them. CRI is 80.

The 200W Type V area light is dimmable, so it can be driven down by a compatible external control for curfew or occupancy-based dimming schedules. The dimming leads and any control device, photocell, or sensor are not part of the fixture package as listed.

No - the LED is integrated into the fixture, with no socket or replaceable lamp. There is no bulb to restock and no relamping on a maintenance schedule; when the LED or driver reaches end of life, the fixture gets swapped. Rated average life is 50,000 hours.

A 200W LED head at 26,536 delivered lumens is the usual one-for-one swap for a 400W metal halide or high pressure sodium shoebox, not a 1000W. A 1000W HID pole typically needs a higher-wattage LED head or a second fixture to hold the same footcandles. Because the LED output is directed rather than lost to the reflector, a photometric layout on your actual pole spacing is the only reliable way to set the count.

Bronze is the only finish offered on the 65-865-5. Bronze is the standard dark finish on commercial site poles, so it will generally blend with existing bronze or dark-bronze poles and arms, though shades vary between manufacturers and a side-by-side match is not guaranteed.

Yes. Lead is identified as a Prop 65 chemical for the 65-865-5. The fixture is also RoHS compliant. Institutional and government buyers who track Prop 65 disclosures on submittals should flag the lead listing in their documentation.