NUVO Lighting 65-867-5 LED Area Light Type V, 240W, Bronze Finish, 5000K, 277-480V

The 65-867-5 is a high-voltage fixture, rated 277V to 480V. That covers 277V and 480V legs on three-phase commercial service. It will not run on 120V or 208-240V, so for a standard 120-277V parking lot circuit you need the multi-volt version of the fixture, not this one.

It ships with a 2-3/8 inch slip-fitter mount, which slides over a 2-3/8 inch outside-diameter tenon or davit arm and clamps down. If your poles have a square drill pattern for a direct arm mount instead of a round tenon, this fixture will not bolt up without an adapter.

It is an outdoor fixture with a wet location rating, so direct rain and snow exposure on an open pole is fine. Safety listing is cULus certified, which covers both US and Canadian installs. Housing is die-cast aluminum, and the fixture is RoHS compliant.

Type V throws light in a symmetrical circular pattern around the pole, so it suits the interior of a parking lot, a yard, or a plaza where you want even coverage in all directions. If the pole sits along a property line or at the edge of a lot, a Type III or forward-throw distribution keeps light off the neighboring property better. The 65-867-5 is the Type V, 240W version at 32,585 lumens.

Output is 32,585 lumens at 240W, which is roughly 136 lumens per watt. That output range typically stands in for a 750W to 1000W metal halide area light, and at 240W draw the energy savings is where the payback sits. Color is 5000K, a cool white, with 80 CRI.

No. It is a fixed 5000K fixture, not CCT selectable. If you are standardizing a campus on 4000K, this one will read noticeably cooler and bluer alongside it, so order the 4000K version of the fixture rather than trying to field-adjust this one.

The fixture is dimmable, so it can be driven by a 0-10V control system for scheduled or sensor-based reduction after hours. Any photocell, sensor, or control module is a separate order; nothing but the 2-3/8 inch slip-fitter mount is included with the fixture.

The housing measures 30.28 inches long, 12.39 inches wide, and 3.11 inches high, and weighs 11.93 lbs. That is a thin, low-profile plate, which keeps wind load modest for a 240W fixture, and light enough for a one-man install from a bucket.

The LED is integrated, so there is no lamp or socket to change out and no bulb to stock. Rated life is 50,000 hours. For a dusk-to-dawn parking lot running about 4,200 hours a year, that works out to roughly a decade before meaningful lumen loss, and at end of life you replace the fixture head.

Yes. The 65-867-5 is listed with lead as a Prop 65 chemical, so California jobs require the warning to be passed through on submittals and documentation.

Bronze is the finish, on a die-cast aluminum housing. Bronze is the common commercial pole-light color, so it will generally blend with existing poles and arms on an established lot rather than standing out the way white or grey would.