NUVO Lighting 65-868 LED Area Light Type III, 300W, Bronze Finish, 4000K, 277-480V

The 65-868 is a high-voltage fixture, rated 277V to 480V. It will run on 277V, 347V or 480V within that band, but it will not work on 120V or 208-240V service. If your pole circuit is 120-277V, you need a fixture rated down to 120V instead.

A 2-3/8 inch slip-fitter mount is included. That lands on a standard 2-3/8 inch OD tenon or horizontal arm. If your pole has a square bolt-on drill pattern or a different tenon diameter, you will need a separate adapter or a different mount configuration, since no arm or pole bracket is supplied.

Wet location rated and built for outdoor use, so direct rain exposure on an open pole is fine. The housing is die-cast aluminum and the fixture is cULus certified.

Type III throws light forward and to the sides in an asymmetric pattern, which is what you want for pole runs along the edge of a lot, a drive aisle, or a perimeter where you do not want spill behind the pole. Type V puts light out in a circle and belongs on poles in the middle of an open lot. The 65-868 is a Type III, 300W fixture at 39,815 lumens, so it is the perimeter and roadway choice.

At 39,815 delivered lumens, the 65-868 is in the range typically used to swap out 1000W metal halide or high pressure sodium shoebox fixtures, which is where most retrofit specs put a 300W LED head. Confirm against your photometric layout, since LED delivered lumens and HID lamp lumens are not measured the same way.

The fixture is dimmable, so it can be driven by a 0-10V style control or scheduling system on the dimming leads. It does not come with a photocell or shorting cap listed as included hardware, so order any photocell or receptacle accessory separately.

No. The LEDs are integrated, with no replaceable lamp or socket, and the fixture is rated for an average 50,000 hours. For MRO planning, treat it as a whole-head replacement rather than a relamp item.

It is a fixed 4000K neutral white at 80 CRI, with no field-selectable CCT. If the rest of your site is 5000K, this head will read noticeably warmer alongside it, so match the whole run or plan to change out the row.

The fixture is RoHS compliant and carries a California Proposition 65 listing for lead. Institutional and government buyers who need Prop 65 disclosure on submittals should flag it as a lead-listed item.

Bronze only. It is a single-finish, utility-style die-cast aluminum head, which is the standard dark finish for parking and roadway poles.