NUVO Lighting TH347 1-Light, PAR20, Track Head, Gimbal Ring, Russet Bronze Finish

The TH347 takes a single PAR20 lamp with a medium E26 screw base, and no bulb ships with the head. Maximum wattage is 50W at 120V, so size the lamp to that ceiling. An LED PAR20 with an E26 base works fine as long as it stays within 50W rated draw.

No. The TH347 is rated for dry locations and indoor use only, so it does not belong in a shower area, a canopy, or any spot that sees damp or wet exposure. For those openings you need a head rated damp or wet.

It is a track head only, one lamp, with a gimbal ring that lets you aim the PAR20 where you want it. Track sections, connectors, power feeds and end caps are separate. Mounting is to a ceiling-run track.

Dimming on the TH347 is lamp dependent. The head itself has no driver or dimming electronics, so whether it dims comes down to the PAR20 lamp you install and the dimmer on the circuit. An incandescent or halogen PAR20 will dim on a standard incandescent dimmer; an LED PAR20 has to be a dimmable model matched to that dimmer.

Extension is 6.63 inches, with the head measuring 2.75 inches wide and 2.75 inches high. Add your track's own height to the 6.63 inch extension when you are working to a ceiling clearance or a soffit depth. At 0.74 lbs it is light enough that it does not load the track in any meaningful way.

A gimbal ring holds the PAR20 in a pivoting ring so the lamp aims within the housing rather than the whole body swinging out. That keeps a tighter, lower-profile look on the track, which is why it gets used for retail wall washing, artwork, and lobby accent runs. A cylinder or round-back head projects further and gives you more shielding against glare if the fixture sits in a sightline. Here you get a 6.63 inch extension with gimbal aiming, which suits a flush, discreet run.

The TH347 carries a cETLus safety listing, which covers both US and Canadian requirements, and it is RoHS compliant. Note that it is flagged under California Proposition 65 for lead, which matters if you are supplying a project with Prop 65 disclosure obligations.

Russet Bronze is the only finish offered on the TH347, built from glass and metal in a transitional style. If you are matching an existing bronze track run, this is a single-finish part number, so there is nothing else to specify when you order.

There is no CCT selector on the TH347. Color temperature is entirely set by the PAR20 lamp you choose, which is useful for a property manager standardizing light color across a building, you just buy one lamp spec for every head.