NUVO Lighting TH411 1-Light, LED, 12W Track Head, Pinch Back, White, 24 degree Beam

The TH411 is a pinch-back style track head running on 120V. Pinch back is the connector style used on Halo-type track, so the head has to go on track matching that connector, not on an H, J or L system of a different pattern. Confirm the connector pattern on the rail you already have before mixing brands, because the head itself has no adapter options.

1020 lumens from 12W, with a 24 degree beam. That narrow spread puts the light in a tight pool rather than washing a room, so it suits accenting artwork, retail merchandise, signage or a display case. For general room lighting you would want a wider beam angle or several heads spaced along the track.

No. The TH411 is rated for dry locations and indoor use only, so damp or wet spots (covered exterior soffits, open porches, shower areas, unconditioned areas that see condensation) are out. Use a damp or wet rated fixture there instead.

Nothing to buy. The light source is an integrated LED, so there is no socket and no lamp to replace. Average rated life is 30,000 hours; at end of life the whole head is replaced rather than relamped. That matters for MRO stocking, you keep spare heads, not spare lamps.

Dimmable, yes. CCT selectable, no, the color temperature is fixed, so every head you install will match without anyone setting a switch in the field. Pair it with a dimmer rated for LED loads. CRI is 90, which is why it gets used over merchandise and artwork where color rendering shows.

Extension is 5.5 inches, with the head measuring 3.63 inches long and 2.88 by 2.88 inches. Weight is 1.05 lbs. Use the 5.5 inch extension when you are checking clearance under low ceilings, in sloped soffits, or over shelving and door swings.

The TH411 carries a cETLus safety listing, which covers both the US and Canada, and it is RoHS compliant. Note the California Prop 65 disclosure for lead if you are shipping into or specifying for a California facility.

White is the finish on the TH411, part number TH411. There is no black option under that number, so if the job calls for black heads on white track (or the reverse) you are looking at a different model number in the NUVO track head line.

NUVO publishes both: a PDF spec sheet at media.satco.com/specsheets/pdf/TH411.pdf and installation instructions at assets.satco.com under the TH411 product folder. Useful if a submittal package or a closeout binder needs the cut sheet attached.