NUVO Lighting TH444 1-Light, LED, 12W Track Head, Pipe, Black, 36 degree Beam

No. The TH444 is an indoor fixture with a dry location rating, so it can't go outdoors or anywhere exposed to moisture, including covered walkways, bathrooms with showers, or unconditioned areas that see condensation. Keep it to conditioned interior ceilings.

The LED is integrated, so there's no lamp to buy and no socket to relamp. It puts out 1020 lumens at 12W with an average rated life of 30,000 hours. When the LED reaches end of life you replace the head, not a bulb, which is worth knowing if you're standardizing a retail or office space on one fixture.

No. This pipe-style track head is a 120V fixture, so it belongs on a standard 120V line-voltage track. A 277V track run needs a head rated for that voltage.

Extension is 6.25 inches from the track, and the head itself measures 3.38 by 2.38 by 2.38 inches. It weighs 0.77 lbs, so it adds very little load to the track run. That 6.25 inch drop is the number to check against low ceilings, soffits, or anywhere the head might sit in the path of a door or display.

Dimming is supported. Each head draws 12W at 120V, so a run of ten heads is 120W total when you size the dimmer. Use an LED-rated dimmer and confirm it's compatible with the control you already have on the circuit.

The 36 degree beam is a medium flood. It covers a shelf section, a display table, or a mid-size piece of art from typical ceiling height without leaving hard edges. If you're trying to punch a tight highlight onto a single small object, you want a narrower spot beam instead. With a CRI of 90, color on merchandise and artwork renders accurately, which matters in apparel, grocery produce, and gallery work.

It carries a cETLus safety listing, which covers both US and Canadian requirements, and it's RoHS compliant. Note that it's listed under California Prop 65 for lead, so facilities in California need the required warning on file.

Fixed. This head is not CCT selectable, so there's no field switch to change white point. If you're adding heads to an existing run, match the color temperature of what's already installed or the row will read uneven.

It's a ceiling-mounted track head, meaning it clips onto an installed track run rather than into a junction box on its own. Budget the track section, connectors, and power feed as separate line items. Installation instructions are published by the manufacturer for the TH444.

Black is the finish offered for the TH444, in the pipe-style body. If you need a different finish across an install, you'd be looking at a different model in the line rather than an option on this one.