NUVO Lighting TK341 3 Light, R30, Straight Cylinder Track Kit, 4 foot Track, Brushed Nickel

The TK341 kit ships with a 4 foot TR127 track section, a TP155 floating power feed, three TH308 track heads, and all required mounting hardware. The only thing you add is lamps: bulbs are not included, and each head takes an R30 medium (E26) base lamp, three total.

No. The TK341 is rated for indoor, dry locations only, so it should not go on a covered porch, in a shower or tub zone, or anywhere subject to damp or wet conditions. It is a ceiling-mount fixture carrying a cETLus safety listing.

The kit uses a floating power feed (TP155), which means the feed can connect to the track at a point that lines up with your existing ceiling junction box rather than forcing the box to sit at the end of the run. That is what makes it workable as a retrofit over an existing box. Wiring is 120V, ceiling mounted, and full mounting hardware is in the box.

Dimming depends on the lamp you put in, not the fixture. The track head itself has no driver, so an incandescent or halogen R30 dims on a standard 120V incandescent dimmer, while an LED R30 only dims if that lamp is rated dimmable and matched to the dimmer.

Figure about 10 inches of extension below the mounting surface for the head assembly, with each head measuring 7 inches long and 4.5 inches in both height and width. That drop matters in a low-ceiling retail bay or a hallway where headroom is tight. The complete kit weighs 5.88 lbs.

The TK341 kit itself covers a 4 foot run with three heads on a TR127 track section. To cover more wall, you either order additional kits and set them in parallel runs, or add matching NUVO track sections, connectors, and TH308-style heads to the same system. The heads and track in this kit are a NUVO track system, so stay within that line when adding pieces.

It is listed ADA compliant, and it is a ceiling-mounted track kit rather than a wall fixture, so protrusion into a corridor path is not the issue it would be with a sconce. It is also RoHS compliant and carries a cETLus safety listing.

The heads are metal-bodied in a brushed nickel finish, in a straight cylinder shape with a transitional styling that matches most brushed nickel plumbing and door hardware already in a unit. Brushed nickel is the only finish offered on the TK341.

Yes, lead is the listed Prop 65 chemical for the TK341. If you are buying for a California jobsite or a public facility, that warning needs to pass through to the end customer.

No. There is no CCT selection on the fixture, because the heads have no integrated LED source. Color temperature comes entirely from whichever R30 E26 lamp you install, so if you are standardizing a building at 3000K you specify that on the bulb order.