NUVO Lighting TK342 3 Light, R30, Bullet Cylinder Track Kit, 4 foot Track, Brushed Nickel

The TK342 kit ships complete except for lamps: one TR127 4-foot track, one TP155 floating power feed, three TH306 track heads, and all required mounting hardware. Bulbs are not included, so add three R30 lamps with a medium E26 base, rated up to 75W each. That is the only separate purchase for a basic ceiling run.

No. The TK342 is an indoor fixture with a dry location rating, so it is out for bathrooms over a tub or shower, covered exterior soffits, porches, and unconditioned garages or loading areas where moisture or condensation is present. Keep it to conditioned dry interior ceilings: offices, retail floors, lobbies, corridors, apartment living space.

120V line voltage, no transformer or low-voltage supply required. Three heads at 75W maximum each puts the kit at 225W fully lamped, so load calculations on a shared 120V lighting circuit should use that figure. The floating power feed lets the electrical connection land anywhere along the 4-foot track rather than forcing the junction box to the end.

It carries a cETLus safety listing, covering both US and Canadian requirements, and it is RoHS compliant. NUVO also states it as ADA compliant, which is the point that comes up on corridor and path-of-travel projects in schools, healthcare, and multi-family. Note the California Prop 65 disclosure for lead, which purchasing departments in California will want on file.

The kit is built around its own TR127 4-foot track section with a TP155 floating power feed, and the three TH306 heads are supplied for that track. Mixing heads onto existing track depends on the track profile already installed, and that is not something to assume from this kit's data. If the goal is to extend an existing run, match the profile of what is up there rather than buying this kit for its heads alone; if the goal is a fresh 4-foot run, the kit is self-contained.

Extension is 10 inches from the ceiling, with each bullet cylinder head measuring 7 inches long and 4.5 inches in both height and width. That 10 inch drop matters in low-ceiling spaces and anywhere the heads sit near a door swing, a cabinet run, or a sprinkler head. It mounts to the ceiling only.

Brushed nickel, and it is the only finish the TK342 is built in. The base material is metal, which is what keeps the bullet cylinder heads holding their aim after repeated adjustment in a space where staff reposition them. Brushed nickel is the safe match against stainless appliances and satin nickel door and cabinet hardware already in most units.

The kit weighs 5.88 lbs complete, light enough that support is a question of the fasteners rather than structural blocking. Mounting hardware is supplied in the box, the mounting method is ceiling, and the floating power feed means the supply connection does not have to sit at the track end. On drywall without a joist behind the mounting points, use anchors rated for the load.