NUVO Lighting TK322 3 Light, R30, Bullet Cylinder Track Kit, 4 foot Track, White

The TK322 kit ships with one TR120 4 foot track section, one TP154 floating power feed, three TH210 track heads, and all required mounting hardware. The only thing you add is lamps: bulbs are not included. You need three R30 lamps with a medium E26 base, rated up to 75W each at 120V.

No. The TK322 is an indoor fixture with a dry location rating only. Keep it out of covered patios, bathrooms over tubs, and any spot that sees damp air or splash. For a porch or breezeway you need a damp or wet rated fixture instead.

The kit carries a cETLus safety listing, which covers it for both US and Canadian installation, and it is flagged ADA compliant. It is also RoHS compliant. One note for California jobs: the Prop 65 chemical disclosure on this fixture is lead.

Yes. The heads take any R30 lamp with a medium E26 screw base, rated to a 75W maximum at 120V. The kit is catalogued as incandescent technology because that is the lamp type it was originally specified around, but an LED R30 in the same base and within that wattage ceiling drops straight in, and an LED will draw well under the limit.

The TK322 is sold as a complete system built around its own TR120 4 foot track with a TP154 floating power feed, and the three TH210 heads are supplied matched to that track. Track connector profiles differ between manufacturers and systems, so unless your existing run is the same NUVO track, plan on installing the included 4 foot section rather than dropping the heads onto what is up there.

Dimming depends entirely on the lamp you install. The kit itself has no driver or integral light source, so if you use dimmable R30 lamps on a compatible 120V dimmer they will dim, and if you use non-dimmable lamps they will not. There is also no color temperature selection built in; CCT is whatever the lamp you choose delivers.

Each bullet cylinder head projects 10 inches from the mounting surface, with the head itself measuring 7 inches long and 4.5 inches in both width and height. It is a ceiling mount kit, so in a room with low headroom or in a retail aisle where a shopper walks under the track, budget that 10 inch extension into your clearance. Total shipping weight for the kit is 5.88 lbs.

It is a hardwired ceiling mount kit at 120V, and it uses a TP154 floating power feed. Floating means the feed can be positioned along the track rather than being locked to one end, so you can align it with an existing ceiling junction box instead of moving the box to suit the track. Wiring instructions are published by the manufacturer for the TK322.

Construction is glass and metal in a white finish, styled as a traditional bullet cylinder head. White is the finish this kit is offered in, so if you are standardizing across several units or adding to an existing white track run in a corridor or retail space, the heads will match visually.