You may also like
NYL FLLY INS 90DEG FEM DSC, 16-14
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Nylon/Polyamide
- Product Subgroup:
- Disconnects
- Product Type:
- Nylon Fully Insulated 90 Degree Flag Female Disconnect
- Standards:
- UL E66716
- Voltage Rating:
- 600 V
- Wire Size:
- 16-14 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Brass
Sta-Kon RBD1877F – Frequently Asked Questions
1) What wire size does the Sta-Kon RBD1877F flag disconnect crimp onto?
The RBD1877F takes 16-14 AWG stranded or solid conductor. That is the blue color code band on insulated terminals, so if you are working off a color-coded crimp tool, use the blue die. For 22-16 AWG you need a red-coded terminal instead, and for 12-10 AWG a yellow one.
2) Is the Sta-Kon RBD1877F rated for 600 volt control and motor circuits?
Yes, it carries a 600 V rating and is UL recognized under file E66716, which covers the typical 120/208/240/480 V control, lighting ballast, and motor lead terminations these flag disconnects get used for.
3) Why use a 90 degree flag disconnect instead of a straight female disconnect?
A flag disconnect brings the wire in at a right angle to the tab, so the conductor runs parallel to the terminal face rather than straight back off it. That is what you want in a shallow junction box, a motor terminal compartment, or behind a switch or relay where there isn't depth to let a straight barrel stick out without kinking the wire. If you have room behind the tab, a straight female disconnect is the simpler part. The RBD1877F is the 90 degree flag version in 16-14 AWG.
4) Does the insulation on this flag disconnect cover the whole barrel, or do I still need heat shrink?
It's a fully insulated terminal: a nylon/polyamide sleeve encloses the crimp barrel, so no additional tape or heat shrink is needed over the connection. Nylon holds up better than vinyl against abrasion and solvents and is the usual choice where terminals get handled during service. The insulator is blue, which is the standard marking for the 16-14 AWG range.
5) What metal is the crimp barrel on the Sta-Kon RBD1877F, and will it work with aluminum wire?
The terminal body is brass, which is a copper-alloy barrel intended for copper conductors. Do not crimp it onto aluminum wire; aluminum terminations require a connector specifically marked AL or AL9CU. Stick to copper 16-14 AWG.
6) Is the Sta-Kon RBD1877F made in the USA for a Buy American job?
Country of origin on the RBD1877F is the United States, which is what most federal, state, and institutional procurement specs are looking for on domestic-content line items.
How fast can I get the Sta-Kon RBD1877F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RBD1877F come with a warranty?
Absolutely. The Sta-Kon RBD1877F is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RBD1877F?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RBD1877F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.