You may also like
FLLY INS NYL 90DEG FEM DSC, 22-18
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Nylon/Polyamide
- Product Subgroup:
- Disconnects
- Product Type:
- Nylon Fully Insulated 90 Degree Flag Female Disconnect
- Standards:
- UL E66716
- Voltage Rating:
- 600 V
- Wire Size:
- 22-18 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Red
- Product Material:
- Brass
Sta-Kon RAD1887F – Frequently Asked Questions
1) What wire gauge does the Sta-Kon RAD1887F flag disconnect crimp?
The RAD1887F takes 22 to 18 AWG stranded or solid copper. That is the red insulation code, and the red nylon barrel on this terminal is what tells you at a glance you are on the small-gauge range rather than 16-14 or 12-10.
2) Is the RAD1887F disconnect rated for 600 volt control circuits?
Yes, it carries a 600 V rating and is UL recognized under file E66716. That covers typical 120/277 V control and lighting work as well as 480 V class control wiring, so long as the conductor itself is rated for the circuit.
3) Why use a 90 degree flag disconnect instead of a straight female disconnect?
A flag terminal brings the wire in at a right angle to the tab, so the lead runs parallel to the device face instead of straight off it. That is what you want in a tight motor terminal box, a thermostat can, or behind a switch where a straight disconnect would need a bend radius you do not have. If you have room for the wire to leave the tab in line, a straight female disconnect is simpler to crimp and cheaper to stock. The RAD1887F is the 90 degree flag version for 22-18 AWG.
4) Is the Sta-Kon flag disconnect fully insulated, and does that matter in a crowded junction box?
It is fully insulated with a nylon (polyamide) sleeve that covers the barrel and the flag body, so the crimp is shielded where terminals sit shoulder to shoulder on a switch bank or motor terminal block. Nylon also holds up better than vinyl against heat and abrasion during pull-in.
5) Is the Sta-Kon RAD1887F made in the USA for a Buy American job?
Country of origin is the United States, which is the documentation an institutional or government procurement file usually needs on electrical consumables. The part number to specify is RAD1887F.
6) What is the conductor material inside this Sta-Kon disconnect?
The terminal body is brass. Brass gives you the spring retention a female push-on needs on the mating tab, and it mates with standard copper conductors without the dissimilar-metal concern you would have with aluminum wire.
How fast can I get the Sta-Kon RAD1887F delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RAD1887F come with a warranty?
Absolutely. The Sta-Kon RAD1887F is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RAD1887F?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RAD1887F from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.