You may also like
1/4 in. Closet Flange Spacer
43519 - spec sheet
Features
- Up to 3 can be stacked together
- Builds up existing toilet flange when new flooring is installed
- Can be stacked to desired height, up to a maximum of 3 rings
- For warranty product details, refer to the Oatey Limited Warranty document
- Can be solvent welded on its horizontal surface using PVC solvent cement or secured using mechanical means
- Spacer builds up existing toilet flange on below-grade flooring
- For use when overlaying, replacing or tiling bathroom floors
- 1/4 in. thick
- 1-pack
43519 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.013
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Flashing and Flanges
- Product Type:
- Flange
- Product Weight:
- 0.25
OATEY 43519 – Frequently Asked Questions
1) I tiled over my bathroom floor and now the toilet flange sits too low. Will the Oatey 43519 spacer fix that?
That's exactly the job it's built for. The Oatey 43519 is a 1/4 inch thick closet flange spacer that builds up an existing toilet flange after new flooring goes in, so the flange sits back at or near the finished floor height instead of below it. It works for overlays, floor replacements, and tile jobs.
2) How do you fasten a toilet flange spacer down so it doesn't move?
Two accepted methods: solvent weld it on its horizontal surface with PVC solvent cement, or secure it mechanically with fasteners. Solvent cement gives you the sealed, permanent option on PVC; mechanical fastening is what you use when you are stacking onto a flange you may want to take apart later. Cement and screws are not included, so add them to the order.
3) Do I still need a new wax ring and closet bolts when I add a flange spacer?
Yes. The Oatey 43519 spacer is the ring only. Wax ring or gasket, closet bolts, and any PVC solvent cement or screws used to secure the spacer are separate items. Plan on resetting the toilet with fresh sealing hardware once the flange is at the right height.
4) Is the Oatey 43519 the part number I should quote for a 1/4 inch closet flange spacer?
Yes. Oatey manufacturer part number 43519 is the 1/4 inch closet flange spacer, sold one ring to a pack.
5) Can a flange spacer be used on a slab or below-grade bathroom?
It can. The spacer is rated for building up an existing toilet flange on below-grade flooring, which is the common situation on a slab bath where new tile or overlay leaves the cast flange sitting low.
How fast can I get the OATEY 43519 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 43519 come with a warranty?
Absolutely. The OATEY 43519 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 43519?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 43519 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.