OATEY 43539 4 in. PVC closet f...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$104.29
$54.29
OATEY 43539 4 in. PVC closet flange replacement

OATEY 43539 4 in. PVC closet flange replacement

(No reviews yet) Write a Review

Model: 43539
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$104.29
$54.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
4 in. PVC closet flange replacement

  • Features

    • 3 stainless steel bolts tighten to compress the rubber gasket, securing the flange to the existing piping
    • Slides inside 4 in. cast iron or PVC Sch. 40 DWV pipe
    • Use as a replacement flange for broken toilet flanges
    • Compression joint provides up to 3 in. of adjustment to the riser
    • Rubber compression gasket enables the toilet flange to be used on many types of cast iron piping
    • Installs easily without tearing up your flooring
    • No caulking required


43539 - spec sheet

Manufacturer Resources

Product Specs

Angle:
Straight
Connection Type:
Gasket
Volume:
0.094
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Flashing and Flanges
Product Type:
Flange
Product Finish:
White
Product Material:
PVC
Product Weight:
0.85

OATEY 43539 – Frequently Asked Questions

1) My toilet flange is cracked but the tile floor is fine. Can I replace it without pulling up the floor?
That is exactly what this repair flange is for. The Oatey 43539 drops down inside the existing 4 inch pipe and clamps in place with three stainless bolts, so the old broken flange comes out and the new one goes in through the same hole. No cutting the drain, no breaking tile, no caulking.
2) My drain pipe sits too low under the finished floor. How much height adjustment does the Oatey 43539 give me?
The compression joint gives up to 3 inches of adjustment on the riser, so you can set the flange face at the finished floor height even after tile or a new underlayment raised it. You set the depth before you torque the three bolts, and the gasket holds it there.
3) Is the Oatey 43539 an inside-fit repair flange or does it glue over the pipe?
Inside fit. It slides into the 4 inch pipe rather than solvent welding to the outside, and the connection type is a gasket, not a cemented socket. That matters on a repair: you do not need clean, square, glueable PVC or a hub, and you do not need clearance around the outside of the pipe to work.
4) Is the Oatey 43539 a straight flange or an offset one?
Straight. The outlet runs vertically in line with the drain below it, so it will not move the toilet's rough-in position. If the closet bend is in the wrong spot and you need the bowl shifted from the pipe centerline, a straight repair flange like this one will not do it, you need an offset closet flange instead.
5) What is the Oatey 43539 toilet flange made of, and will it corrode in a wet slab?
The body is white PVC, and the three clamping bolts are stainless steel. Nothing in the assembly rusts the way a cast iron flange or a plated-steel repair ring does, which is why it holds up in slab-on-grade bathrooms and multi-family units where the old iron flange rotted at the floor line.
6) Do I need to order anything else with the Oatey 43539 to reset the toilet?
The flange comes with the three stainless steel bolts and the rubber compression gasket that secure it to the pipe. What it does not cover is the toilet side of the job: you still need a wax ring or waxless seal and a pair of closet bolts to set the bowl. Budget those on the same order so the fixture goes back down the same visit.
How fast can I get the OATEY 43539 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 43539 come with a warranty?
Absolutely. The OATEY 43539 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 43539?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 43539 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!