You may also like
16 oz. ABS To PVC Transit Green Cement
30925 - spec sheet
Features
- Meets ASTM Standard D3138 and complies with NSF/ANSI 61 health effects requirements
- Medium viscosity easily fills gaps and provides more working time
- Can be used to join ABS to PVC in non-pressure transition joints up to 6 in. diameter
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Code-approved Green cement solvent welds ABS to PVC
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- Please refer to the Oatey Limited Warranty for warranty details
- For ABS-plumbed structures with PVC-plumbed local sewer systems
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
30925 - spec sheet
Manufacturer Resources
Product Specs
- Application Type:
- DWV Pipe
- Maximum Application Temperature C:
- 43
- Maximum Application Temperature F:
- 110
- Maximum Use Temperature C:
- 60
- Minimum Application Temperature C:
- 4
- Minimum Application Temperature F:
- 40
- Volume:
- 0.034
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Pipe Cements & Primers
- Product Type:
- Cement/Primer
- Product Finish:
- Green
- Product Material:
- Transition
- Product Weight:
- 1.15
OATEY 30925 – Frequently Asked Questions
1) Can Oatey 30925 green cement be used to join ABS pipe to PVC pipe?
That's exactly what the Oatey 30925 green transition cement is for. It solvent welds ABS to PVC in non-pressure transition joints up to 6 inch diameter, which is the usual situation when an ABS-plumbed building ties into a PVC local sewer. It is a DWV-pipe product only, so do not use it on pressure lines.
2) Will a plumbing inspector accept green transition cement on an ABS to PVC joint?
The 30925 green cement is code-approved for solvent welding ABS to PVC, meets ASTM D3138 and complies with NSF/ANSI 61 health effects requirements. The green color is what inspectors look for on a transition joint, since it visibly identifies the joint as made with the correct transition cement rather than straight ABS or PVC cement.
3) Can I use green transition cement on a pressurized water line or a hot water line?
No. The 30925 is rated for non-pressure DWV transition joints only, so keep it off supply and pressure piping. Maximum use temperature is 60 degrees C, which suits drain, waste and vent service, not hot pressurized water. For pressure PVC work you need a pressure-rated PVC cement and primer instead.
4) What temperature can I apply Oatey 30925 transition cement at? Is it OK for cold weather work?
Recommended application range on the 30925 is 40 to 110 degrees F (4 to 43 degrees C). Below 40 F you are outside the recommendation, so for winter work in an unheated crawlspace or an outdoor trench, warm the pipe and fittings and keep the can indoors between joints, or schedule the tie-in for the warmer part of the day.
5) Do I need a primer with Oatey ABS to PVC green transition cement?
The 30925 is a one-step transition cement and no separate primer is called out for it. Clean and dry both pipe ends, deburr, then apply the green cement. Note it is medium viscosity, which fills gaps better and gives you more working time on a larger transition joint than a thin, fast-set cement.
6) How much cement is in the Oatey 30925 can and how far does a 16 oz can go?
The 30925 is a 16 oz (pint) can, listed at 0.034 cubic feet volume and 1.15 lb product weight. A pint is the size most crews carry for a handful of transition joints up to 6 inch; for a single 3 or 4 inch sewer tie-in it is more than enough, and the pint can comes with a dauber sized for larger pipe.
How fast can I get the OATEY 30925 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 30925 come with a warranty?
Absolutely. The OATEY 30925 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 30925?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 30925 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.