You may also like
32 oz. ABS To PVC Transit Green Cement
30926 - spec sheet
Features
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- Meets ASTM Standard D3138 and complies with NSF/ANSI 61 health effects requirements
- For ABS-plumbed structures with PVC-plumbed local sewer systems
- Can be used to join ABS to PVC in non-pressure transition joints up to 6 in. diameter
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Please refer to the Oatey Limited Warranty for warranty details
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Code-approved Green cement solvent welds ABS to PVC
- Medium viscosity easily fills gaps and provides more working time
30926 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.066
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Pipe Cements & Primers
- Product Type:
- Cement/Primer
- Product Weight:
- 2.2
OATEY 30926 – Frequently Asked Questions
1) Can I use Oatey green transition cement to join ABS pipe to PVC pipe?
That is exactly what Oatey 30926 green transition cement is for. It solvent welds ABS to PVC in non-pressure transition joints up to 6 inch diameter, the typical case being an ABS-plumbed building tying into a PVC local sewer main. It is not a pressure-pipe cement, so keep it to drain, waste and vent style non-pressure transitions.
2) Is Oatey 30926 green cement approved for potable-related plumbing and low VOC jurisdictions?
It meets ASTM D3138 and complies with NSF/ANSI 61 health effects requirements. It is a low VOC solvent cement meeting California SCAQMD 1168/316A or BAAQMD Method 40 requirements, and Oatey solvent cements and primers are certified to UL Greenguard Gold, so it clears the air-quality districts that reject standard cements.
3) What temperature can I apply ABS to PVC transition cement in?
Recommended application temperature for the Oatey 30926 green transition cement is 40F to 110F (4C to 43C). Below that range on a cold morning trench tie-in, warm the material and the joint area or wait for the day to come up before you weld.
4) Do I need primer before using this ABS to PVC transition cement?
The 30926 is a code-approved green transition cement that solvent welds ABS to PVC on its own. Because it is medium viscosity, it fills gaps and gives you more working time on the joint than a thin-bodied cement, which matters on larger diameters up to 6 inches where you have to get the fitting home before set.
5) How much cement is in the Oatey 30926 can and how far does it go?
The 30926 is a 32 ounce (quart) can, roughly 0.066 cubic feet of package volume at about 2.2 lbs shipping weight. A quart is the size crews carry for a run of transition joints rather than a single repair; for one tie-in a smaller can of the same green transition cement covers it.
How fast can I get the OATEY 30926 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 30926 come with a warranty?
Absolutely. The OATEY 30926 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 30926?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 30926 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.