OATEY 43525 3 in. or 4 in. PVC Long Pattern Closet Flange with Plastic Ring without Test Cap

That is exactly what the 43525 is for. The long pattern hub gives extra flange length so it can reach down to a pipe that was cut short, instead of stacking spacer rings on a standard flange. Dry fit it first to confirm the ring lands flush on the finished floor before you solvent weld, because once it is glued the depth is set.

The Oatey 43525 is UPC and ASTM D2665 listed. ASTM D2665 is the standard for PVC DWV pipe and fittings, which is what an inspector looks for on a solvent welded drainage connection.

No. The 43525 is the version without a test cap. If you still need to pressure or water test the drainage system before setting the toilet, order the test cap variant of the Oatey long pattern flange or plug the line separately, because there is no knock-out cap in this one.

Six screw holes, along with the closet bolt slots, so the ring can be anchored to wood or concrete subfloor and accommodates common toilet installation patterns. You supply the floor screws and closet bolts to suit the subfloor.

The 43525 uses a PVC plastic ring. Plastic will not corrode, which is why it is commonly specified in bathrooms, slab work, and anywhere moisture sits around the flange. A stainless or cast ring is the choice when you want more resistance to being deformed by over-torqued closet bolts or heavy commercial traffic. For standard residential and light commercial toilet sets, the all-PVC ring is the usual call.

Oatey 43525. That is the manufacturer part number to quote for the long pattern PVC closet flange with the plastic ring and no test cap.

Each 43525 flange is listed at 0.833 lb with a volume of 0.123, which is useful if you are palletizing a multi-unit turn or stocking a service truck for a run of toilet replacements.