OATEY 43507 3 in. PVC Closet F...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$60.00
$10.00
OATEY 43507 3 in. PVC Closet Flange with Plastic Ring and Test Cap

OATEY 43507 3 in. PVC Closet Flange with Plastic Ring and Test Cap

(No reviews yet) Write a Review

Model: 43507
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$60.00
$10.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3 in. PVC Closet Flange with Plastic Ring and Test Cap

  • Features

    • 4 strike points make test cap knockout effortless
    • For warranty product details, refer to the Oatey Limited Warranty document
    • 4 screw holes designed to meet any toilet installation type while providing secure attachment to floor
    • Includes a premolded test cap
    • Flange sits flush on floor
    • Level Fit™ toilet flange with plastic molded ring
    • UPC and ASTM D2665 listed
    • Fits inside 3 in. PVC pipe
    • Test cap is designed to minimize knockout fall through and doesn't shatter down the drain pipe


43507 - spec sheet

Manufacturer Resources

Product Specs

Volume:
0.065
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Flashing and Flanges
Product Type:
Flange
Product Weight:
0.625

OATEY 43507 – Frequently Asked Questions

1) Does the Oatey 43507 closet flange go inside 3 inch PVC pipe or over it?
The 43507 is an inside-fit flange. The hub drops down into the inside diameter of 3 inch PVC pipe and solvent welds there, so you need a 3 inch PVC stub coming up through the floor, cut so the flange body can sit flush on the finished floor. If your stub is 4 inch, or if you need a flange that fits over the outside of the pipe, this is the wrong part.
2) Will the Oatey 43507 flange work with standard toilet closet bolts and floor anchoring?
Yes. The 43507 uses a plastic molded ring with 4 screw holes for fastening the flange body down to the subfloor, and the ring takes standard closet bolts for the toilet itself. The 4-hole pattern is laid out to suit the common toilet installation types.
3) Is the Oatey 43507 flange code approved for a residential toilet drain?
It is UPC listed and meets ASTM D2665, the standard for PVC DWV pipe and fittings, which is what an inspector looks for on a closet flange in a drain, waste and vent system.
4) Does the Oatey 43507 toilet flange come with a test cap, and how do you knock it out?
A premolded test cap is included, so the drain can be capped for the pressure or water test before the toilet is set. It has 4 strike points so the knockout breaks free cleanly, and the cap is shaped to resist falling through and shattering down the drain line. No separate test plug purchase needed.
5) What is the difference between a plastic ring closet flange and a metal ring version?
The 43507 uses a plastic molded ring rather than a stamped stainless or galvanized one. Plastic will not rust or stain the floor and is easier to cut if you ever need to remove it, which is why it is common in residential and multi-family remodels. A metal ring holds up better where the flange gets repeated toilet swaps or heavy abuse, such as high-traffic commercial restrooms.
6) Should the Oatey 43507 flange sit on top of the finished floor or be recessed?
It is built to sit flush on the floor, on top of the finished surface, which is the normal setting height so the wax ring seals against the toilet horn. Plan your tile or vinyl thickness before cutting the 3 inch stub. If the flange ends up below the finished floor, you will need an extender ring to bring it back up rather than stacking wax rings.
7) What is the Oatey part number and UPC for the 3 inch PVC closet flange with test cap?
Oatey manufacturer part number 43507, UPC 038753435077. It is the Level Fit PVC closet flange with the plastic molded ring and premolded test cap, sized to fit inside 3 inch PVC.
8) How much does the Oatey 43507 closet flange weigh for a stocking order?
Each 43507 flange is 0.625 lb with a volume of 0.065, light enough that property maintenance shops and plumbing contractors commonly carry several on the truck for toilet swaps and rough-in work.
How fast can I get the OATEY 43507 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 43507 come with a warranty?
Absolutely. The OATEY 43507 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 43507?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 43507 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!