OATEY 43494 3 in. x 4 in. ABS ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$62.86
$12.86
OATEY 43494 3 in. x 4 in. ABS Closet Flange with Stainless Steel Ring without Test Cap

OATEY 43494 3 in. x 4 in. ABS Closet Flange with Stainless Steel Ring without Test Cap

(No reviews yet) Write a Review

Model: 43494
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$62.86
$12.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3 in. x 4 in. ABS Closet Flange with Stainless Steel Ring without Test Cap

  • Features

    • Patented alignment indicators provide an easy visual when setting the flange
    • 3 strike points for effortless test cap knock out
    • UPC and ASTM D2661 listed
    • 6 screw holes provided for installation versatility
    • Fits inside 4 in. or over 3 in. ABS Sch. 40 DWV pipe
    • Corrosion-resistant stainless steel flange ring
    • Bolt slot shelf eliminates bolt fall through
    • Can be rotated to allow precise alignment of bolts and screws


43494 - spec sheet

Manufacturer Resources

Product Specs

Angle:
Straight
Connection Type:
Solvent Weld
Volume:
0.068
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Flashing and Flanges
Product Type:
Flange
Product Finish:
Black
Product Material:
ABS
Product Weight:
0.7

OATEY 43494 – Frequently Asked Questions

1) Will the Oatey 43494 closet flange fit 3 inch or 4 inch ABS pipe?
Both. The 43494 is a 3 in. x 4 in. ABS closet flange, meaning the hub fits inside 4 in. ABS Sch. 40 DWV pipe or slips over the outside of 3 in. ABS Sch. 40 DWV pipe. One part covers either rough-in, which is why it's a common stocking item for repair work where you don't know what's under the floor until the old flange is off.
2) How does the Oatey 43494 flange attach to the pipe - is it glued or does it have a gasket?
Solvent weld. The 43494 is ABS and bonds to ABS DWV pipe with ABS cement, so you need clean, dry, deburred pipe and the correct solvent. It is not a compression, gasketed, or push-fit flange, and ABS cement will not make a sound joint to PVC pipe.
3) Does the Oatey 43494 come with a test cap, and what if I need to pressure test the line?
No test cap on the 43494 - that's the distinction in this model. It's the version for a line that's already been tested or one you're repairing, where you're setting the toilet right away. If you still need to hold water or air on the stack for inspection, order the test-cap version of the 3 in. x 4 in. ABS flange instead; that one has 3 strike points so the cap knocks out cleanly when you're ready to set the closet.
4) Can I rotate the Oatey 43494 flange to line up the closet bolts after gluing?
The ring rotates on the flange body, so you can index the bolt slots square to the wall and land the screw holes on solid floor framing independently of how the hub sets on the pipe. Six screw holes give you options when a joist or a subfloor seam is in the way. Set your rotation before the cement grabs on the hub itself.
5) Is the Oatey 43494 closet flange code approved for a residential or commercial job?
The 43494 is UPC listed and meets ASTM D2661, the standard covering ABS Schedule 40 DWV pipe and fittings. That's the pairing an inspector looks for on an ABS drain, waste and vent system.
6) Is the flange ring on the Oatey 43494 metal or plastic?
Stainless steel. The ring is the part that takes the closet bolt load and gets wet from any seal failure, so a corrosion-resistant stainless ring is the reason to pick this over an all-plastic ring flange. The body itself is black ABS.
7) Do the closet bolts fall through the slots on the Oatey 43494 while setting a toilet?
No. The 43494 has a bolt slot shelf that holds the closet bolt head captive so it won't drop through when you're wrestling the bowl into place. There are also patented alignment indicators molded in to give you a visual reference for squaring the flange to the wall before it's fastened.
8) How much does the Oatey 43494 flange weigh for a multi-unit hardware order?
Each 43494 flange runs 0.7 lb with a volume of 0.068, useful numbers if you're pulling a pallet quantity for a multi-family turn or a new-construction rough-in package.
How fast can I get the OATEY 43494 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 43494 come with a warranty?
Absolutely. The OATEY 43494 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 43494?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 43494 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!