4 in. Soft Aluminum 18 in. x 18 in. base
12865 - spec sheet
Features
- Rustproof stamped soft aluminum base allows for easy shaping of flashing
- Do not use petroleum based products or paint on flashing collar or plastic base
- Not for hot-mopped or built-up roofs
- For pitch from 0-40°
- 18 in. x 18 in. Aluminum base
- Rated 180°F continuous heat and approved for Type B installations
- Self-sealing collar slides over pipe and requires no caulking
- For warranty product details, refer to the Oatey Limited Warranty document
12865 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.221
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Weight:
- 0.963
OATEY 12865 – Frequently Asked Questions
1) What pipe size does the Oatey 12865 roof flashing fit?
The Oatey 12865 is sized for 4 inch vent pipe. The self-sealing collar slides down over the pipe and seals without caulking, so there is no sealant step at the stack.
2) Can I use this Oatey aluminum vent flashing on a flat or low-slope roof?
It covers pitch from 0 to 40 degrees, so a flat or low-slope deck is within range. The limit is the roof construction, not the slope: it is not for hot-mopped or built-up roofs, so on a BUR assembly you need a different flashing.
3) Is the Oatey 12865 flashing rated for a Type B gas vent?
Yes. It is approved for Type B installations and rated for 180 degrees F continuous heat, so it works on a B-vent penetration as well as a plumbing stack.
4) How big is the base on the Oatey 12865, and will it lay in under shingles?
The stamped soft aluminum base measures 18 in. x 18 in. The aluminum is soft enough to shape to the deck and course of the roof, which is what lets it tuck under the shingles above the penetration.
5) Can I paint the collar or seal the Oatey 12865 with roofing tar?
No. Keep petroleum based products and paint off the flashing collar and plastic base, since they degrade the seal material. The collar is designed to seal on its own against the pipe.
6) Will an aluminum roof flashing rust out on a coastal or high-rain job?
The stamped soft aluminum base is rustproof, so it will not corrode through the way a plain steel base can. Note the aluminum is soft by design, which helps forming but means it dents if you walk on it hard during install.
7) What part number do I order for the Oatey 4 inch aluminum roof flashing with an 18x18 base?
Order Oatey model 12865. That is the 4 in. soft aluminum flashing with the 18 in. x 18 in. base and self-sealing collar.
How fast can I get the OATEY 12865 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 12865 come with a warranty?
Absolutely. The OATEY 12865 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 12865?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 12865 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.