OATEY 12852 No-Calk® 3 in. Alu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$94.29
$44.29

OATEY 12852 No-Calk® 3 in. Aluminum Roof Flashing 18 in. x 18 in. Base

(No reviews yet) Write a Review

Model: 12852
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$94.29
$44.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
No-Calk® 3 in. Aluminum Roof Flashing 18 in. x 18 in. Base
  • Features

    • Self-sealing collar slides over pipe and requires no caulking
    • Not for hot-mopped or built-up roofs
    • Do not use petroleum based products or paint on flashing collar or plastic base
    • Rated 180°F continuous heat and approved for Type B installations
    • For pitch from 0-40°
    • Rustproof stamped soft aluminum base allows for easy shaping of flashing
    • For warranty product details, refer to the Oatey Limited Warranty document
    • 18 in. x 18 in. Aluminum base


12852 - spec sheet

Manufacturer Resources

Product Specs

Base Size Diameter:
18" X 18"
Volume:
0.152
Department:
Plumbing
Product Group:
Roofing
Product Subgroup:
Flashing and Flanges
Product Type:
Roof Flashing
Product Finish:
Unfinished
Product Material:
Aluminum
Product Weight:
0.867

OATEY 12852 – Frequently Asked Questions

1) Will the Oatey 12852 roof flashing work on a low-slope or steep roof?
The Oatey 12852 No-Calk flashing is rated for roof pitch from 0 to 40 degrees, so it covers everything from a dead-flat deck up to roughly a 10:12 slope. It is not for hot-mopped or built-up roofs, so if the deck is tar-and-gravel or mod-bit torch-down, this is the wrong flashing.
2) Does the Oatey 12852 need caulk or sealant around the pipe?
No. The self-sealing collar slides down over the pipe and seals against it without caulking. One caution: do not use petroleum based products or paint on the collar or the plastic base, as they will attack it.
3) Can the Oatey 12852 be used on a hot vent or Type B gas flue?
It is rated for 180 degrees F continuous heat and approved for Type B installations, so it suits Type B gas vent as well as plumbing vent stacks. For anything running hotter than that continuous rating, use a different flashing.
4) Will the aluminum base on the Oatey 12852 conform to an uneven roof deck?
Yes. The base is stamped soft aluminum, so it can be shaped by hand to the roof contour and over shingle profiles, and it is rustproof. The base ships unfinished, which is normal for a flashing that gets covered by the course above it.
5) What is the Oatey part number and weight for a 3 inch No-Calk flashing with an 18 x 18 aluminum base?
Order Oatey 12852. It weighs 0.867 lb, light enough to carry a stack of them up a ladder in one trip when you are re-flashing multiple stacks on a building.
How fast can I get the OATEY 12852 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 12852 come with a warranty?
Absolutely. The OATEY 12852 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 12852?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 12852 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.