OATEY 86036 6" ABS Sediment Drain, Cast Iron Grate w/ Bucket

The Oatey 86036 is a 6 inch ABS sediment drain supplied with a cast iron grate and a sediment bucket. The bucket sits under the grate to catch solids before they enter the waste line, and it lifts out for cleaning. Nothing else is needed to make up the drain body itself; the connection to the waste piping is made in ABS.

Two materials in one assembly. The drain body is ABS plastic, so it solvent welds to ABS DWV piping, while the grate is cast iron for traffic and impact. That combination is common where the floor sees carts or foot traffic but the buried piping is plastic.

A sediment drain carries a removable bucket inside the body that traps grit, sand, and debris so it can be lifted out instead of settling in the waste line. Use one in wash bays, mechanical rooms, mop areas, and similar spots where solids wash across the floor. If the floor only sees clean water and occasional spills, a standard floor drain with a strainer is simpler and there is no bucket to service. The Oatey 86036 is the sediment version, 6 inch, with a cast iron grate.

Order by Oatey manufacturer part number 86036, the 6 inch ABS sediment drain with cast iron grate and bucket. There is a single model, so there are no finish, size, or outlet options to specify.

It weighs 21 pounds, most of that in the cast iron grate and the sediment bucket. One person can set it, but plan on a second set of hands if you are lowering it into a formed pocket in a slab.

Yes, and that is the point of it. The sediment bucket fills with whatever the floor washes in, so it has to be pulled and emptied on a schedule set by how dirty the area is. Skip it and the bucket overflows its capacity and solids carry through. Property managers standardizing on these should build the bucket cleanout into the janitorial routine.