OATEY

Hercules® 16 oz. Cutting Oil - Dark Features Protection helps make sharp clean threadsllFormulated for hand thread cutting machinesllNo offensive odors Anti-mist and non-staining formula is not...

2 in. 151 Cast Iron with 2 in. Sch. 40 No-Calk Connection Features Compatible with 2 in. Schedule 40 cast iron pipe Low-profile design allows for installation in tight spaces Crown ring set is...

Gallon CPVC All Weather Flowguard Gold® 1-Step Yellow Cement Features No primer needed where local codes permit Please refer to the Oatey Limited Warranty for warranty details Helps protect pipes...

4 oz. Great White® Pipe Joint Compound with PTFE Features Can be used with plastic and metal threads White, non-hardening, non-separating, non-toxic paste Lubricates and seals all threaded...

32 oz. ABS Extra Special Medium Body Black Cement Features Can be used on all schedules and classes of ABS pipe and fittings up to 6 in. diameter with interference fit Meets ASTM Standard D2235 and...

32 oz. PVC Regular Body Advanced Clear Cement Features Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements Recommended application temperature of 40°F to 110°F / 4°C...

8 oz. Great Blue® Pipe Joint Compound Features Use on PVC, CPVC, ABS, polyethylene, polypropylene, iron, steel, copper or brass threads up to and including 2" Withstands up to 3,000 PSI on gases...

16 oz. Dark Cutting Oil (Speed Threading) Features Anti-mist and non-staining formula is not affected by weather For warranty product details, refer to the Oatey limited Warranty...

Gallon PVC Heavy Duty Clear Cement Features Meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements Low VOC solvent cement that meets California South Coast Air Quality...

Safe-Flo® 1 lb. Silver Wire Solder Display Features Not recommended for use on aluminum Unlimited shelf life 0.117 In Gauge 420°F - 460°F melting range Copper, bismuth, tin and silver alloy Meets...

Cherne® 1-1/2 in. End of Pipe Gripper® Plug Features ABS glass-reinforced plates for added strength Extra large zinc wing nut for ease of tightening, no wrench required 1.5 in Natural rubber O-ring...

6 ft. x 33 ft. 40 Mil Black – Roll Features Meets ASTM D4068 Liner marked in 6" increments for ease of measuring Available in 40 mil thickness 41584 - spec sheet

STRAINER TAILPIECE 1.5 X 12, BUDGET

STRAINER TAILPIECE 1.5 X 8, BUDGET

TUBE TBE 1.5 X 12, 20 GAUGE

72049

88034

STRAINER TAILPIECE 1.5 X 6, BUDGET

4" ABS Adj. Commercial Drain w/ 6" NI Grate & Square Ring

2" ABS Adj. Commercial Drain w/ 8" Cast CHR Grate & Round Top