You may also like
OH-WEDGES - POWER TAPS
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Group:
- Wire & Cable Management
- Product Type:
- PowerTap Wedges
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Tap Size:
- 2/0 to 1/0 STR AWG2/0 SOL AWG
- Type2:
- Electrical taps
- Department:
- Electrical
- Product Subgroup:
- Tap Connectors
- Product Size:
- 2 inch
- Product Material:
- Aluminum
Blackburn PT-4008-K – Frequently Asked Questions
1) What conductor sizes does the Blackburn PT-4008-K power tap wedge accept?
The PT-4008-K wedge connector is rated for 2/0 to 1/0 stranded AWG and 2/0 solid AWG conductors. If your run or tap conductor falls outside that range, this is the wrong wedge in the series and you need the size that brackets your actual conductor.
2) Is the Blackburn PT-4008-K aluminum or copper, and can I use it on aluminum overhead conductor?
It is an aluminum-bodied wedge connector with a bare finish, no plating or coating. Aluminum bodies are what overhead distribution taps normally use on aluminum conductor. Standard practice on any aluminum connection is to wire brush the conductor and apply an oxide inhibiting compound before setting the wedge.
3) Does the PT-4008-K come as a complete tap connector or do I need a separate sleeve?
The Blackburn PT-4008-K is sold as a kit, one per unit, and the C-member and wedge are the matched set for that catalog number. It is sold each, so order one per tap you are making, not per span.
4) What tool do I need to install a Blackburn PowerTap wedge connector?
Wedge connectors like the PT-4008-K are driven, not crimped. The C-member goes over the run and tap conductors and the wedge is driven home with a powder-actuated or hydraulic wedge tool sized to the connector series. A standard compression crimper will not set it.
5) Is the PT-4008-K suitable for overhead line work or is it an enclosure connector?
It is an overhead wedge tap, meant for making a tap off a run conductor on a distribution line. For taps inside a panel, pedestal, or transformer cabinet, a mechanical set screw lug or a compression tap is the usual choice instead.
6) Is the Blackburn PT-4008-K made in the USA?
Yes. Country of origin on the PT-4008-K wedge tap is the United States, which matters if you are buying against a Buy American or domestic-preference requirement on a utility or public works job.
7) How big is the PT-4008-K wedge connector?
Product size on the PT-4008-K is listed as 2 inch. Worth checking against your conductor spacing and any existing hardware on the pole before you commit to a quantity.
How fast can I get the Blackburn PT-4008-K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn PT-4008-K come with a warranty?
Absolutely. The Blackburn PT-4008-K is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn PT-4008-K?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn PT-4008-K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.