You may also like
WEDGE CLAMPS
Manufacturer Resources
Product Specs
- Connection Type:
- Tension
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Aluminum Service Wedge Clamp
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Cable gland connector
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 12-1/2 in X Depth Flexible
- Installation Category:
- Yes
- Product Material:
- Aluminum
Blackburn W62-1FC-T – Frequently Asked Questions
1) What voltage is the Blackburn W62-1FC-T wedge clamp rated for?
The W62-1FC-T service wedge clamp carries a 35 kV rating, so it covers primary distribution work as well as secondary service connections. It is a bare aluminum clamp with no insulation of its own, so any covering or re-insulation at the connection point has to be added separately.
2) Can I use the Blackburn W62-1FC-T on aluminum conductors, or copper only?
The clamp body is aluminum, which makes it suited to aluminum service conductors. It is a tension-type connection, meaning the wedge is driven to hold the conductors under spring tension rather than being torqued down with a bolt.
3) How many conductors does one W62-1FC-T wedge clamp take?
One. Each W62-1FC-T handles a single conductor connection, and it is sold individually rather than in a kit or bag, so order one clamp per connection point on the job.
4) What size is the Blackburn W62-1FC-T clamp?
It measures 12-1/2 inches in length with a flexible depth, so the gripping range adapts to the conductor rather than being fixed to one gauge. Useful when a service crew is standardizing on one clamp across a range of conductor sizes.
5) Do I need a special tool to install a Blackburn wedge clamp?
Yes. A wedge clamp is a tension connection, not a bolted lug, so it is set with a wedge-driving tool rather than a wrench or torque driver. Crews doing overhead service taps should have the driving tool on the truck before the clamps arrive.
6) Is the W62-1FC-T finished or plated, and does that matter outdoors?
Bare aluminum, no plating or coating. That is standard for service wedge clamps on aluminum conductors, but it means the mating surfaces are unprotected out of the box, so an oxide-inhibiting compound at the connection is the normal practice for an outdoor overhead service.
7) Where is the Blackburn W62-1FC-T manufactured?
Mexico. For utility and municipal procurement with country-of-origin reporting on the PO, that is the declared origin for the W62-1FC-T.
How fast can I get the Blackburn W62-1FC-T delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn W62-1FC-T come with a warranty?
Absolutely. The Blackburn W62-1FC-T is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn W62-1FC-T?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn W62-1FC-T from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.