You may also like
ST. STEEL WEDGE CLAMP
Manufacturer Resources
Product Specs
- Connection Type:
- Tension
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Number Of Conductors:
- 1
- Product Group:
- Wire & Cable Management
- Product Type:
- Wedge Clamp
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Cable gland connector
- Voltage Rating:
- 35 kV
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Length 12 in X Depth 2-3/8 in
- Installation Category:
- Yes
- Product Material:
- Stainless Steel
Blackburn W62D – Frequently Asked Questions
1) How many conductors does the Blackburn W62D take?
One. It's a single-conductor clamp, so for a three-phase termination you order three, one per phase. It's sold each, not in a kit or multi-pack.
2) How big is the Blackburn W62D wedge clamp?
Stated size is 12 in length by 2-3/8 in depth. Check your enclosure, vault wall, or pothead clearance against that 12 inch run before ordering, since it needs the full length plus room to tension.
3) Is the Blackburn W62D suitable for outdoor or corrosive environments?
It's made of stainless steel with a bare, unplated finish, so there's no coating to chip or corrode away. That makes it workable outdoors, in vaults, and in damp or salt-exposed locations where a plated steel or zinc clamp would rust.
4) How does a wedge clamp like the Blackburn W62D hold the cable, and does it need a crimp tool?
It's a tension-type connection, not a compression fitting. The wedge is driven to mechanically clamp the conductor, so no hydraulic crimper or die set is involved. That is what makes it usable on a pole or in a vault where bringing in crimp gear isn't practical.
5) Does the Blackburn W62D come insulated or do I need to cover it?
No insulation is supplied with it. The clamp ships bare stainless, so any insulating or covering required by the installation, such as tape, tubing, or a cover, has to be sourced separately.
6) What part number and manufacturer should I put on the purchase order for the stainless wedge clamp?
Order it as Blackburn W62D. That's the manufacturer part number, and the country of origin on record is Mexico, which matters if you're filing origin paperwork on a government or institutional job.
How fast can I get the Blackburn W62D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn W62D come with a warranty?
Absolutely. The Blackburn W62D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn W62D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn W62D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.