You may also like
IDEAL Industries Punchmaster™ II Impact Punchdown Tool
Model: IDL-35-485
Punchmaster™ II Impact Punchdown Tool
Features
Includes both 110 and 66 full blades – 110 (cut/no-cut), 66(cut/no cut)
Includes both 110 and 66 full blades – 110 (cut/no-cut), 66 (cut/no cut)
Spring...
Ideal Industries
$166.76
$116.76
IDEAL Industries RTQ™ XR™ RG-6 F Compression Connector -10 pk
Model: IDL-92-651
RTQ™ XR™ RG-6 F Compression Connector -10 pk
Features
Industry standard 21mm compressed length – works with non-IDEAL compression tools
Accepts RG-6/RG-6 Quad/RG-6 Plenum/RG-6 Plenum Quad coax...
Ideal Industries
$52.19
$2.19
IDEAL Industries FT-45™ Feed-Thru Modular Plug Crimp tool
Model: IDL-30-495
FT-45™ Feed-Thru Modular Plug Crimp tool
Features
Easier plug assembly with feed-thru design
Trims wires flush with connector end
Works on feed-thru, standard and shielded modular plugs
Compact...
Ideal Industries
$141.01
$91.01
OmniSeal™ Pro XL Compression Tool
30-793 - spec sheet
Features
- To reset tool to default position, close handle and raise post to the longest (center) adjustment mark.
- Our flagship professional grade compression tool
- Compresses F/BNC/RCA/RG-11F/Mini-Coax/90° connectors
- Tool is now set for 90° connectors. Connector will compress against the top spring clip level.
- Re-tighten locknut by hand, then secure it with a clockwise turn of the post.
- Works with all IDEAL compression connectors
- No loose adapters required. No adjustments needed for most IDEAL connectors.
- With the handle in the closed position, lower the post with the screwdriver until the top of the compression post is even with the bottom adjustment line of the tool.
- Adjustable post and adjustable spin knob increases connector compatibility
30-793 - spec sheet
Manufacturer Resources
Product Specs
- To Adjust:
- Loosen the locknut by turning the post counterclockwise with a flathead screwdriver.