Pamex FU - Grade 3 Calypso Sin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$20.04
$10.23
Pamex Pamex FU - Grade 3 Calypso Single Dummy Lever FLU604

Pamex FU - Grade 3 Calypso Single Dummy Lever

(No reviews yet) Write a Review

Model: FLU604

In Stock (leaves warehouse same day if ordered before 3pm ET)

$20.04
$10.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
SPECIFICATIONS

Door Preparation
Cross Bore: 2-1/8”, Edge: 1”
Latch Backset
Exterior: 2-3/8” deadlatch standard
Interior: 2-3/8” plainlatch standard
(other options available)
Faceplate
1” x 2-1/4” round corner standard
(other options available)
Bolt
1/2” throw
Door Thickness
Fit 1-3/8” to 1-3/4” standard
(extension kit available for 1-3/4” to 2-1/4” door)
Cylinder
5-pin KW keyway solid brass cylinder standard
5-pin SC “C” keyway available
Strike Plate
2-1/4” x 1-3/4” round corner full lip standard
(other options available)
Handing
Non-Handed
Material
Zinc die-cast lever
ANSI/BHMA
A 156.2 Grade 3

 

FUNCTIONS

Entry
Both lever locked or unlocked by key outside or turn-piece inside.

Privacy
Both levers locked or unlocked by turn-piece inside. Outside lever unlocked by coin or screwdriver.#

Passage
Both levers always free.

Half Dummy
For doors where only pull is required.

 

Manufacturer Resources

Product Specs

Subcategory:
Residential Locksets
Standard Strike:
2-1/4" x 1-3/4" round corner full lip
Standard Latch:
Exterior: 2-3/8" deadlatch; Interior: 2-3/8" plainlatch
Grade:
Grade 3
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Commercial/Residential:
Residential
Handle Type:
Lever
Product Model:
FLU
Product Finish:
Satin Nickel
Door Thickness Range:
1-3/8" to 1-3/4"
Product Category:
Mechanical Locks
Product Substrate:
Zinc
Department:
Door Hardware

Pamex FLU604 – Frequently Asked Questions

1) Does the Pamex Calypso single dummy lever actually latch, or is it just a pull?
It's a pull only. A single dummy lever mounts one lever on one face of the door with no latch, no spindle through the door, and no moving mechanism. Pamex describes the dummy function as being for doors where only a pull is required. Use it on closet doors, inactive leaves of a French pair, or false doors that are held shut by a ball catch or roller catch you supply separately.
2) I need matching levers on the rest of the doors in the unit. What functions does the Calypso family come in?
Four, so you can run one lever design through a whole apartment or house: entry (key outside, turn-piece inside), privacy (turn-piece inside, emergency release by coin or screwdriver outside), passage (both levers always free), and the dummy pull. The latching functions come standard with a 2-3/8 inch backset, 2-3/8 deadlatch on the exterior side and a plainlatch on the interior.
3) Is a Grade 3 zinc lever good enough for an apartment turn?
For residential interior use, yes. The Calypso is an ANSI/BHMA A156.2 Grade 3 residential lockset with a zinc die-cast lever, which is the normal spec for apartment and single family interiors. If you are hanging it on a corridor, office, or school door with commercial traffic, step up to a Grade 2 or Grade 1 dummy trim such as the BEST 7KC single dummy (Grade 2, medium duty) or the BEST 9K 1DT (Grade 1, heavy duty).
4) What is a heavy duty equivalent to the Pamex Calypso single dummy lever for a commercial opening?
The Pamex Calypso FLU dummy lever is a Grade 3 residential leverset with a zinc die-cast lever. For commercial traffic, the BEST 9K Series 1DT single dummy trim lever is Grade 1 heavy duty and non-keyed, and the Accentra 455LN Augusta is a Grade 1 single dummy cylindrical lever. Both serve the same pull-only purpose on a door with no latch.
5) I need a lever on a door that actually latches, not a dummy. What should I order instead of the Pamex Calypso dummy?
A dummy lever is a fixed pull with no latch mechanism. For a latching hall or closet door at a comparable residential grade, the Kwikset 200BRNL Breton passage lever is Grade 3 with a 1-3/8 to 1-3/4 inch door thickness range, matching the Pamex Calypso FLU range, and the Callan Asheville is a Grade 3 passage leverset in satin nickel, the same finish the Calypso dummy carries.
6) Will the Pamex Calypso dummy lever fit a 1-3/8 inch door?
The Calypso line is built for 1-3/8 to 1-3/4 inch doors, which covers the common interior slab and a standard 1-3/4 inch door alike. Since a dummy lever surface mounts to one face, door thickness is less critical than it is on the latching functions in the family, but the stated range is 1-3/8 to 1-3/4 inches.
7) Do I need to bore a 2-1/8 inch hole for a Pamex dummy lever?
No. The 2-1/8 inch cross bore with a 1 inch edge bore is the prep for the keyed, privacy, and passage functions in the Calypso family, because those carry a latch. The single dummy has no latch and no edge bore, so if you are covering an old bore you will want to confirm the rose diameter covers it before you skip the patch plate.
8) Is this lever right or left handed?
Non-handed. The Calypso lever is listed as non-handed, so one part works on a right or left hand door. Worth noting if you are comparing against the Baldwin Estate 5103 half dummy, which is sold as separate left hand and right hand parts and has to be ordered to match the door.
9) I have a door thicker than 1-3/4 inches. Can I still use Calypso levers?
Yes, on the latching functions. Pamex offers an extension kit that takes the Calypso up to 1-3/4 to 2-1/4 inch doors. If you would rather buy one lock that spans it out of the box, the Falcon K101 passage covers 1-3/8 to 2-1/4 inches, and the Dexter C1000 passage runs 1-3/8 to 1-3/4.
10) What keyway do the keyed Calypso levers use if I want the dummy to match?
The keyed entry function ships standard with a 5-pin Kwikset keyway solid brass cylinder, with a 5-pin Schlage C keyway available as an option. Pick whichever matches the keys already in the building. The dummy itself has no cylinder, so it just needs to match visually.
11) What else could I use if I want a dummy lever in a different style or a pair of them?
For a matched pair on a set of French doors, the Emtek Classic Cortina dummy and the Emtek Arts and Crafts dummy both ship as pairs. For another Grade 2 residential option, the Callan Bentley dummy lever is a close substitute. Heavy duty commercial dummy trim comes from the BEST 7KC and 9K 1DT. Note the Pamex Calypso dummy is a single, so a French pair needs two of them.
12) If I order the passage or entry Calypso instead, will it work with my existing strike prep?
The Calypso ships with a 2-1/4 by 1-3/4 inch round corner full lip strike and a 1 by 2-1/4 inch round corner faceplate as standard, with a 1/2 inch bolt throw. That is the common residential prep, so it usually drops into an existing frame cutout. If your frame has square corner prep, Pamex lists other faceplate and strike options.
13) I need dummy levers on both leaves of a double door. Is the Pamex Calypso sold that way?
The Pamex Calypso FLU is a single dummy, so a pair of openings needs two. Emtek sells dummy leversets as a pair, including the Arts and Crafts lever and the Cortina lever in the Classic Brass line, if you prefer a single packaged pair.
14) Is the Pamex Calypso dummy handed, and what if I need a handed half dummy?
The Pamex Calypso FLU is non-handed. If the design calls for a handed half dummy, the Baldwin Estate 5103 with 5048 rose is offered in left hand and right hand versions.
15) What keyed lever matches the Pamex Calypso dummy if I am doing a whole-door package?
The Pamex FLU line is offered in entry, privacy, passage and half dummy functions, so the keyed entry from the same line pairs with the dummy. If you are cross-shopping, the Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body covering 1-3/8 to 1-3/4 inch doors, and the Callan Artino is a Grade 3 entrance leverset.
How fast can I get the Pamex FLU604 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pamex FLU604 come with a warranty?
Absolutely. The Pamex FLU604 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pamex FLU604?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pamex FLU604 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!