You may also like
Panduit T75FC0 Spiral Wrap Cable Bundling Tubing, Black Polyethylene
Model: PAN-T75FC0
Panduit T75FC0 Spiral Wrap, Black PolyethyleneThe Panduit T75FC0 Spiral Wrap is a weather-resistant black polyethylene wrap that provides continuous abrasion protection for wires, cables, and tubing...
Panduit
$328.53
Panduit CLT Slit Corrugated Loom Tubing, Polyethylene, Black
The Panduit CLT Series Slit Corrugated Loom Tubing is a black polyethylene wire loom designed to shield cable bundles and pre-assembled harness assemblies from impact and abrasion. This family is available in two sizes — 5" and 25" — letting electrical professionals select the option that matches the scale of the job, from short equipment leads to full harness builds. Every option shares the same slit-wall design, polyethylene construction, and UL94-HB flammability rating, and each roll runs 100' (30.48m) in length for long cable runs. The tubing is intended for indoor applications and is built to protect conductors without adding significant bulk to a harness.
Key Features
- Size Options: Available in 5" and 25" sizes to match different bundle diameters and job requirements.
- Roll Length: 100' (30.48m) per roll across the family, supporting long cable runs and harness builds.
- Durable Construction: Polyethylene material resists impact and abrasion to protect enclosed conductors.
- Slit-Wall Design: Slit down the length of the tubing allows quick installation directly onto a bundle of wires or a pre-assembled harness assembly, increasing productivity and eliminating the need to thread wires through the tubing.
- Secure Retention: Tubing is held in place on the harness with cable ties and accessories (sold separately).
- Operating Temperature Range: Rated from -40°F (-40°C) to 122°F (50°C) for demanding indoor environments.
- Finish: Black color, consistent across all sizes.
Certifications & Compliance
- UL94-HB Flammability Rating
- RoHS Compliant
Technical Specifications
- Maximum Operating Temperature (°F): 122
- Minimum Operating Temperature (°F): -40
- Overall Length (ft.): 100
- Std. Pkg. Qty.: 1
- Country of Origin: USA
- Resistance Properties: Impact-Resistant
Typical Applications
- Cable Bundle and Wire Harness Protection
- Pre-Assembled Harness Assembly Wrapping
- Indoor Electrical and Industrial Wiring Runs
- Equipment and Panel Wiring Protection
- Renovation and New Construction Cable Management
Why Panduit?
Panduit's CLT Series slit corrugated loom tubing combines a durable polyethylene build with a UL94-HB flammability rating and RoHS-compliant construction, giving electrical professionals a reliable way to protect cable bundles from impact and abrasion regardless of which size they select. The slit-wall design and cable-tie retention make it a practical, code-conscious choice for indoor wire harness and cable management work, and the shared 100' roll length across both 5" and 25" options keeps installation consistent from job to job.
Manufacturer Resources
Product Specs
- Maximum Operating Temperature (°F):
- 122
- Std. Pkg. UOM:
- Roll
- Overall Length (m):
- 30.48
- Standard Carton Volume Ft3:
- 0.0000
- Mercury Content Indicator:
- N
- Product Segment:
- IEI
- Resistance Properties:
- Impact-Resistant
- Standard Carton Weight Pounds:
- 0.0000
- Minimum Operating Temperature (°F):
- -40
- Min Order Qty:
- 4.0000
- UOM EA PK:
- EA
- Pallet Volume:
- 0.000000
- Any Reason Not to Sell:
- N
- REACH Status:
- N
- Country of Origin:
- United States
- Std Ctn Qty:
- 0
- Product Type:
- Loom Tubing
- Flammability Rating:
- UL94-HB
- Minimum Operating Temperature (°C):
- -40
- RoHS Compliant:
- Compliant
- Min. Order UOM:
- Roll
- ARRA Compliant:
- Y
- Maximum Operating Temperature (°C):
- 50
- Std. Pkg. Qty.:
- 1
- Overall Length (ft.):
- 100
- Environment:
- Indoor
- Hazardous Material Flag:
- N
- Product Material:
- Polyethylene
- Product Color:
- Black
- Department:
- Electrical
- Product Group:
- Cable Management & Identification
- Standards:
- UL94-HB
- Product Subgroup:
- Electrical Sleeves
Panduit CLT50F-C20 – Frequently Asked Questions
1) Can Panduit CLT slit loom tubing be installed over a harness that's already made up?
Yes. The CLT25F-C20 is slit down its full length, so you open the wall and press it over an existing bundle or a pre-assembled harness instead of threading conductors through it. Once it's on, it's held with cable ties or loom clamps, which are ordered separately.
2) What size wire bundle will the Panduit CLT25F-C20 loom tubing fit?
The CLT25F-C20 has a 0.281 inch (7.14mm) inside diameter, so it suits small bundles, a few conductors or a single jacketed cable up to roughly a quarter inch. Anything larger needs a bigger loom size.
3) Is Panduit CLT slit loom rated for outdoor or direct sun use?
No. This polyethylene loom is specified for indoor applications only, with an operating range of -40F (-40C) to 122F (50C). For exterior runs, buried conduit, or anything in direct weather, use a product rated for outdoor exposure.
4) Will slit loom tubing hold up in an unheated warehouse or a hot equipment cabinet?
Cold is not a problem: the tubing is rated down to -40F (-40C), so unheated storage and winter job sites are within range. Heat is the limit. The top end is 122F (50C), which rules out enclosures that run hot near drives, transformers, or heaters. Check the actual cabinet temperature, not just ambient room temperature.
5) What's the difference between Panduit CLT25F-C20 and CLT50F-C20?
They're the same black polyethylene slit loom in different tubing sizes. CLT25F-C20 is the smaller one at 0.281 inch inside diameter; CLT50F-C20 is the larger size for fatter bundles. Order by the bundle diameter you're covering.
6) Does this Panduit loom tubing meet RoHS and Buy American style procurement requirements?
It is RoHS compliant, flagged ARRA compliant, and made in the USA, which covers the usual boxes on government, education, and healthcare purchase orders. It carries no mercury content and is not a hazardous material.
7) What flammability rating does Panduit CLT slit loom carry?
UL94-HB, the horizontal burn classification. That's adequate for general indoor harness and panel wiring protection, but if your spec sheet calls for a self-extinguishing V-0 or V-2 material, this polyethylene loom won't satisfy it.
8) Why use corrugated loom instead of spiral wrap or braided sleeving on a cable bundle?
Corrugated loom gives you a rigid-walled, impact-resistant tube that takes knocks and abrasion in equipment, panel, and machine wiring. The corrugation lets it bend around routing without collapsing. Spiral wrap and braid flex more and are easier to break out of mid-run, but they don't shield conductors from impact the way a corrugated wall does. The slit version here is the one to pick when the harness is already terminated and you can't thread it.
How fast can I get the Panduit CLT50F-C20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Panduit CLT50F-C20 come with a warranty?
Absolutely. The Panduit CLT50F-C20 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Panduit CLT50F-C20?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Panduit CLT50F-C20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.