Panduit Pan-Lug 2/0 AWG Alumin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.73
Panduit Pan-Lug 2/0 AWG Aluminum Compression Splice, 35kV Rated

Panduit Pan-Lug 2/0 AWG Aluminum Compression Splice, 35kV Rated

(No reviews yet) Write a Review

Model: SA2/0-L

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Panduit Pan-Lug 2/0 AWG Aluminum Compression Splice, 35kV Rated

The Panduit Pan-Lug Aluminum Compression Splice is a tin-plated, thick-wall aluminum splice engineered for high-conductivity connections on 2/0 AWG aluminum conductors. Factory pre-filled with joint compound and sealed with a pull-out end plug to inhibit corrosion, this splice is UL Listed and CSA Certified to 35 kV and temperature rated to 90°C when crimped with Panduit or specified competitor crimping tools and dies. Die index markings on the barrel simplify proper crimp die selection for fast, accurate installation.

Key Features

  • Aluminum Conductor Size: 2/0 AWG for a secure, high-conductivity splice connection.
  • Durable Construction: High-conductivity, thick-wall aluminum body for long-term strength and current-carrying capacity.
  • Finish: Tin-Plated to inhibit corrosion at the connection point.
  • Sealed Joint Compound: Factory pre-filled joint compound with an easy pull-out end plug helps inhibit corrosion during installation.
  • Die Index Marking: Panduit and specified competitor die index numbers marked on the barrel (T & B Die Index 54, Burndy Die Index 297) for correct crimp die selection.
  • Internal Solid Stop: Prevents over-insertion of the conductor for a consistent, repeatable splice.
  • Rated Performance: UL Listed and CSA Certified to 35 kV and temperature rated to 90°C when crimped with Panduit or specified competitor tools and dies.
  • Insulation: Non-Insulated splice body with a wire strip length of 1-1/8" (28.6 mm).

Certifications & Compliance

  • UL Listed
  • CSA Certified to 35 kV
  • Temperature Rated to 90°C
  • RoHS Compliant

Technical Specifications

  • Maximum Voltage (kV): 35
  • UL Temperature Rating (°C): 90
  • CSA Temperature Rating (°C): 90
  • T & B Die Index Number: 54
  • Burndy Die Index Number: 297
  • Overall Length (In.): 2.31
  • Overall Length (mm): 58.7
  • Wire Strip Length (In.): 1-1/8
  • Wire Strip Length (mm): 28.6
  • Color Code: Olive
  • Std Ctn Qty: 200
  • Std. Pkg. Qty.: 50
  • Min Order Qty: 1.0000
  • Country of Origin: India
  • GTIN Package: 00613056858107

Typical Applications

  • Electrical Power Distribution Splicing
  • Industrial and Utility Wiring Connections
  • Aluminum Conductor Termination
  • High-Voltage Electrical Installations up to 35 kV
  • Panelboard and Switchgear Wiring

Why Panduit?

Panduit's Pan-Lug aluminum compression splices combine thick-wall, high-conductivity aluminum construction with a tin-plated finish and factory-sealed joint compound to deliver corrosion-resistant, code-compliant connections. Backed by UL Listing and CSA Certification to 35 kV with a 90°C temperature rating, these splices are built for dependable performance in demanding electrical power distribution work.

Manufacturer Resources

Product Specs

Standard Package Volume Ft3:
0.0191
Standard Package Weight Pounds:
3.8000
Aluminum Conductor Size:
2/0 AWG
REACH Status:
N
Std. Pkg. UOM:
Piece
Base Material:
Aluminum
Std Carton Length In:
15.25
CSA Temperature Rating (°C):
90
California Pro65 Cancer:
N
Std Carton Height In:
4.25
Std Package Length In:
7.25
Maximum Voltage (kV):
35
Finish/Coating:
Tin-Plated
Overall Length (mm):
58.7
UL Temperature Rating (°C):
90
Standard Carton Volume Ft3:
0.0763
Color Code:
Olive
Mercury Content Indicator:
N
Std Package Length MM:
184.15
Std Carton Width In:
11.5
Sub Brand:
Pan-Lug™
Std Ctn Qty:
200
Wire Strip Length (In.):
1-1/8
Product Type:
Compression Splice
GTIN Carton:
50613056858102
Std Carton Height MM:
107.95
Std Package Width MM:
136.652
Pallet Quantity:
0
Std Package Height In:
3.38
Standard Carton Weight Pounds:
15.2000
Std Package Height MM:
85.852
Min Order Qty:
1.0000
RoHS Compliant:
Compliant
GTIN Package:
00613056858107
Min. Order UOM:
Piece
Std. Pkg. Qty.:
50
T & B Die Index Number:
54
Overall Length (In.):
2.31
Std Carton Length MM:
387.35
Std Carton Width MM:
292.1
UOM EA PK:
PK
Burndy Die Index Number:
297
Pallet Volume:
0.000000
Std Package Width In:
5.38
Hazardous Material Flag:
N
Any Reason Not to Sell:
N
Insulation Material:
Non-Insulated
Wire Strip Length Mm:
28.6
Department:
Electrical
Product Group:
Wire Connectors & Terminals
Product Subgroup:
Wire Connectors

Panduit SA2/0-L – Frequently Asked Questions

1) How much insulation do I strip back for a Panduit SA2/0-L aluminum splice?
Strip 1-1/8 inches (28.6 mm) off each conductor end. The barrel is 2.31 inches (58.7 mm) overall with an internal solid stop at the center, so each side takes that strip length and butts against the stop, which keeps both crimps in the same position every time.
2) What crimp dies do I need if I'm running Burndy or T&B tooling instead of Panduit?
The die index numbers are marked right on the barrel: T&B die index 54, Burndy die index 297. Use those dies in your existing tool head. The UL Listing and 90 C rating hold when the splice is crimped with Panduit or the specified competitor tools and dies, so matching the marked index is what keeps the connection within its listing.
3) Is this splice rated for medium voltage cable up to 35kV?
Yes. The Pan-Lug aluminum compression splice is UL Listed and CSA Certified to 35 kV maximum, with a 90 C temperature rating under both UL and CSA. That covers power distribution, switchgear and utility splicing on 2/0 AWG aluminum. It is a non-insulated body, so the voltage rating is realized through your own tape, tubing or splice kit insulation system.
4) Do I have to add oxide inhibitor compound before crimping this aluminum splice?
No separate compound is needed. The barrel comes factory pre-filled with joint compound and sealed with a pull-out end plug. Pull the plug, insert the stripped conductor to the internal stop, and crimp. The tin plating on the aluminum body adds corrosion resistance at the connection.
5) What can I use instead of the Panduit SA2/0-L if the splice has to join aluminum to copper?
The Panduit Pan-Lug SA2/0-L is an aluminum-bodied splice specified for 2/0 AWG aluminum conductors. If the joint has to accept copper as well, look at the NSi Industries ASC-T series dual-rated aluminum compression splice, which is AL9CU rated for use on either aluminum or copper conductors. Match the conductor size to the ASC-T part you order.
6) Is a tinned copper compression splice a direct substitute for the Panduit SA2/0-L?
No. The Panduit SA2/0-L has an aluminum body with a tin-plated finish and is sized for 2/0 AWG aluminum conductor. A tinned copper splice such as the NSi Industries C series long barrel or SC series short barrel is a copper-bodied connector intended for copper conductor runs. The tin plating on the Panduit part is a corrosion finish over aluminum, not an indication that the barrel is copper, so the two are not interchangeable on an aluminum feeder.
7) Is the Panduit Pan-Lug aluminum splice RoHS compliant for a spec submittal?
Yes, it is RoHS compliant, UL Listed and CSA Certified to 35 kV, with a 90 C temperature rating. Country of origin is India. That set covers most submittal packages for power distribution and switchgear work.
8) My conductor run is copper and space in the enclosure is tight. What splice should I be looking at instead?
The Panduit SA2/0-L runs 2.31 inches overall and is built for aluminum conductor, so it is the wrong family for a copper run. For copper in a confined enclosure, the NSi Industries SC series is a short barrel tinned copper compression splice; the NSi C series is the long barrel version of the same copper splice where barrel length is not a constraint.
9) How do I identify the right Pan-Lug splice on the job site by color?
The 2/0 AWG aluminum Pan-Lug splice, part SA2/0-L, carries an olive color code. Pair that with the die index numbers stamped on the barrel (54 for T&B, 297 for Burndy) to confirm you have the correct size in hand before crimping.
10) Can I buy a single Panduit SA2/0-L splice or do I have to take a full box?
Minimum order is 1 piece. Standard package is 50 pieces and the standard carton holds 200, so larger MRO or utility stocking orders line up on those multiples.
How fast can I get the Panduit SA2/0-L delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Panduit SA2/0-L come with a warranty?
Absolutely. The Panduit SA2/0-L is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Panduit SA2/0-L?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Panduit SA2/0-L from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!