You may also like
Panduit Panduct DNT-100 Sidewall Notching Tool for Wiring Duct
The Panduit Panduct® DNT-100 Sidewall Notching Tool is a hand-held tool built specifically for removing sidewalls of Panduit wiring duct to facilitate intersections or bundling of wire ducts. Compact at 9.5"x2.37" (241.3x60.2mm), it gives electricians and panel builders a purpose-made way to modify Panduct duct runs quickly and cleanly during panel fabrication or field installation.
Key Features
- Compact Dimensions: Overall size of 9.5"x2.37" (241.3x60.2mm) for easy handling in panels and enclosures.
- Purpose-Built Function: Hand-held sidewall notching tool engineered specifically for Panduit wiring duct.
- Application: Removes sidewalls to facilitate the intersection or bundling of wire ducts.
- Simple Packaging: Supplied as 1 piece per package, ready for immediate shop or field use.
- Country of Origin: Manufactured in the United States.
Certifications & Compliance
- ARRA Compliant
- RoHS Directive Not Applicable to This Product
- No Mercury Content
- REACH Status: N
Technical Specifications
- REACH Status: N
- Mercury Content Indicator: N
- Std Ctn Qty: 0
- Product Segment: IEI
- Pallet Quantity: 0
- Std Package Height In: 1.4
- ARRA Compliant: Y
- Std. Pkg. Qty.: 1
- Overall Length (In.): 9.5
- UOM EA PK: EA
- Std Package Width In: 4.6
- Hazardous Material Flag: N
- Any Reason Not to Sell: N
- Product Size: 5"
Typical Applications
- Wire Duct Intersections
- Wire Bundling Within Panduct Wiring Duct Systems
- Electrical Panel and Enclosure Wiring Fabrication
- Panel Shop and Field Installations
Why Panduit?
Panduit designs the Panduct DNT-100 as a dedicated accessory for its wiring duct systems, giving installers a precise, compact tool for clean sidewall removal at duct intersections and bundling points. Manufactured in the United States, it supports reliable, repeatable duct modifications for professional panel builders and electricians.
Manufacturer Resources
Product Specs
- Standard Package Volume Ft3:
- 0.0472
- Standard Package Weight Pounds:
- 0.6875
- REACH Status:
- N
- Std. Pkg. UOM:
- Piece
- Overall Width (mm):
- 60.2
- Std Package Length In:
- 12.75
- Overall Length (mm):
- 241.3
- Country of Origin:
- United States
- Standard Carton Volume Ft3:
- 0.0000
- Std Package Length MM:
- 323.85
- Mercury Content Indicator:
- N
- Sub Brand:
- Panduct®
- Std Ctn Qty:
- 0
- Product Segment:
- IEI
- Product Type:
- Hand-Held Sidewall Notching Tool
- Std Package Width MM:
- 116.84
- Pallet Quantity:
- 0
- Std Package Height In:
- 1.4
- Standard Carton Weight Pounds:
- 0.0000
- Std Package Height MM:
- 35.56
- Min Order Qty:
- 1.0000
- RoHS Compliant:
- RoHS directive is not applicable
- GTIN Package:
- 00074983250011
- Min. Order UOM:
- Piece
- ARRA Compliant:
- Y
- Std. Pkg. Qty.:
- 1
- Overall Length (In.):
- 9.5
- UOM EA PK:
- EA
- Pallet Volume:
- 0.000000
- Std Package Width In:
- 4.6
- Hazardous Material Flag:
- N
- Any Reason Not to Sell:
- N
- Pallet Weight:
- 0.0000
- Overall Width (In.):
- 2.37
- Product Size:
- 5"
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Pliers & Cutters
- Application:
- For removing sidewalls to facilitate the intersection or bundling of wire ducts.
Panduit DNT-100 – Frequently Asked Questions
1) What does the Panduit DNT-100 notching tool actually do?
The DNT-100 is a hand-held sidewall notching tool that removes the sidewalls of Panduit Panduct wiring duct so wire bundles can pass through and duct runs can intersect. It is used at the point where two duct runs cross or where a bundle needs to exit the duct, instead of cutting the wall with snips or a knife.
2) Will the DNT-100 work on other brands of wire duct, or only Panduit?
It is built specifically for Panduit Panduct wiring duct. Panduit designs the DNT-100 as a dedicated accessory for its own duct systems, so if your panel uses another manufacturer's duct, treat fit as unconfirmed rather than assumed.
3) Is the DNT-100 small enough to use inside a control panel or enclosure?
Yes. Overall size is 9.5 inches long by 2.37 inches wide (241.3 x 60.2 mm), which keeps it manageable when you are working between duct runs inside an enclosure rather than at the bench.
4) Is the Panduit DNT-100 made in the USA and does it meet ARRA / Buy American requirements?
The DNT-100 is manufactured in the United States and is flagged ARRA compliant, which is what a government or federally funded institutional buyer needs on record for domestic sourcing requirements.
5) What size is the DNT-100 rated for, and is there more than one version?
There is a single version, listed at a 5 inch product size, ordered under part number DNT-100. No handing, no left and right variants, no finish choices to specify.
6) Does the DNT-100 come as a single tool or in a multi-pack?
One tool per package, and the minimum order is one piece. There is no kit or multi-pack configuration, so a panel shop outfitting several benches orders a quantity of individual tools.
7) Is there any hazardous material or mercury declaration needed for the DNT-100?
No. The tool carries no mercury content, is not flagged as hazardous material, and the RoHS directive is not applicable to it. Useful if your facility requires a materials declaration on incoming tooling.
8) How much does the packaged DNT-100 weigh and how big is the box?
Packaged weight is 0.6875 lb, in a box measuring 12.75 x 4.6 x 1.4 inches (0.0472 cubic feet). Light enough that a shop can stock several without a freight consideration.
How fast can I get the Panduit DNT-100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Panduit DNT-100 come with a warranty?
Absolutely. The Panduit DNT-100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Panduit DNT-100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Panduit DNT-100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.