Panduit PLC Locking Clamp Cabl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$272.71
Panduit PLC Locking Clamp Cable Tie, Nylon 6.6 Construction

Panduit PLC Locking Clamp Cable Tie, Nylon 6.6 Construction

(No reviews yet) Write a Review

Model: PLC1.5I-S8-M

In Stock (leaves warehouse same day if ordered before 3pm ET)

$272.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Panduit PLC Locking Clamp Cable Tie, Nylon 6.6

The Panduit PLC Locking Clamp Cable Tie secures cable bundles to control panels, communication racks, walls, or ceilings using a #10 (M5) screw. This family is available in sizes from 1" to 12", allowing bundling either before or after the clamp is screwed into place. Molded from natural-color Nylon 6.6, the PLC series is CE Compliant, CSA Certified, UL Listed, UL Recognized, and UL 62275 Compliant (Type 2, 21), and ships in bulk packages for commercial and industrial installations.

Key Features

  • Size Range: Offered from 1" to 12" to match a wide variety of bundle and mounting requirements.
  • Screw Size: Designed for use with a #10 (M5) screw for direct clamping to panels, racks, walls, or ceilings.
  • Reusable Clamp Design: The clamp base allows bundling either before or after it is fastened in place, and supports rescrewing or repositioning as needed.
  • Durable Construction: Molded from Nylon 6.6 for reliable strength and long service life in indoor environments.
  • Natural Color: Consistent natural finish suited to general-purpose cable management applications.
  • Operating Temperature Range: Rated from -76°F (-60°C) to 185°F (85°C) for stable performance across environments.
  • Installation Temperature Range: Suitable for installation from -4°F to 185°F (-20°C to 85°C).
  • Minimum Bundle Diameter: Accommodates bundles as small as 0.06 in. (1.5mm).
  • Packaging: Supplied in bulk packaging for commercial and industrial installations.

Certifications & Compliance

  • CE Compliant
  • CSA Certified
  • UL 62275 Compliant (Type 2, 21)
  • UL Listed
  • UL Recognized
  • RoHS Compliant

Technical Specifications

  • Maximum Operating Temperature (°F): 185
  • Minimum Operating Temperature (°F): -76
  • Maximum Operating Temperature (°C): 85
  • Minimum Operating Temperature (°C): -60
  • Minimum Installation Temperature (°F): -4
  • Minimum Installation Temperature (°C): -20
  • Minimum Bundle Diameter (mm): 1.5
  • Available Sizes: 1", 12"
  • Country of Origin: Malaysia

Typical Applications

  • Securing Cable Bundles to Control Panels and Enclosures
  • Communication Rack and Data Center Cable Management
  • Wall and Ceiling-Mounted Cable Routing
  • Commercial and Industrial Electrical Installations
  • Indoor Bundling Where Rescrewing or Repositioning Is Needed

Why Panduit?

Panduit builds the PLC Locking Clamp Cable Tie family from durable Nylon 6.6 and backs it with CSA certification, UL Listing, UL Recognition, and UL 62275 compliance, giving installers a dependable, code-compliant option across the full 1" to 12" size range for organizing and securing cable bundles in commercial and industrial settings.

"

Manufacturer Resources

Product Specs

Maximum Operating Temperature (°F):
185
Std. Pkg. UOM:
Piece
Lead Content Indicator:
N
Mercury Content Indicator:
N
Minimum Installation Temperature (°F):
-4
Product Segment:
IEI
Minimum Operating Temperature (°F):
-76
Min Order Qty:
1,000.0000
Minimum Bundle Diameter (In.):
0.06
UOM EA PK:
PK
Minimum Bundle Diameter (mm):
1.5
Any Reason Not to Sell:
N
REACH Status:
N
California Pro65 Cancer:
No
Country of Origin:
Malaysia
Product Type:
Locking Clamp Tie
Minimum Operating Temperature (°C):
-60
RoHS Compliant:
Compliant
Min. Order UOM:
Piece
ARRA Compliant:
Y
Maximum Operating Temperature (°C):
85
Std. Pkg. Qty.:
1000
Environment:
Indoor
Hazardous Material Flag:
N
Restricted Use of Hazardous Substances:
N
Minimum Installation Temperature (°C):
-20
Prop 65 Warning:
No
Product Material:
Nylon 6.6
Product Color:
Natural
Product Size:
12"
Product Size:
1"
Department:
Electrical
Product Group:
Wiring Devices
Pack Size:
1000
Trade Size:
1" - 12"
Listing:
cULus
Standards:
UL 62275

Panduit PLC1.5I-S8-M – Frequently Asked Questions

1) What screw size does the Panduit PLC3S locking clamp cable tie need for mounting?
The PLC3S mounts with a #10 (M5) screw through the integral clamp head. The screw is not part of the tie, so order fasteners separately for your panel, rack, wall, or ceiling substrate. The clamp lets you bundle the cable either before or after the screw goes in, which matters when you are working overhead and want the tie anchored first.
2) What size cable bundle will the Panduit PLC3S tie hold?
Length is 12.0 inches (305mm), and the minimum bundle it will close down on is 0.06 in. (1.5mm). So a single small conductor is fine at the low end, and the 12 inch strap covers a fairly large bundle at the top. If you only need to anchor a very short run, the shorter 1 inch version of the Pan-Ty locking clamp tie, PLC1.5I-S8-M, is the other size in the family.
3) Difference between the Panduit PLC1.5I-S8-M and PLC3S-S10-M locking clamp ties?
They are the two sizes of the same Pan-Ty locking clamp tie. PLC1.5I-S8-M is the 1 inch size and takes a #8 screw by its part designation; PLC3S-S10-M is the 12 inch size and takes a #10 (M5) screw. Pick by bundle size and by the clearance hole already drilled in your panel, since the screw sizes are different.
4) Can I use these Panduit locking clamp ties outdoors or in an unheated building?
These are specified for indoor use. Temperature-wise the tie operates from -76 F to 185 F (-60 C to 85 C), so an unheated indoor mechanical room or a hot control cabinet is within range. Installation should be done between -4 F and 185 F (-20 C to 85 C) because nylon gets brittle to work with below that. For genuine outdoor or UV exposure, use a weather-resistant black tie instead.
5) Are Panduit Pan-Ty PLC3S clamp ties UL Listed and RoHS compliant?
The PLC3S carries UL Listing and UL Recognition, is CSA Certified, CE Compliant, and meets UL 62275 as Type 2, 21. It is RoHS compliant, ARRA compliant, and carries no Prop 65 warning, with no lead or mercury content flagged. That covers most federal and institutional submittal requirements for cable management hardware.
6) How many Panduit PLC3S cable ties come in a package?
Standard packaging is 1,000 pieces, and 1,000 is also the minimum order quantity. There is no small-count bag, so this is a bulk buy sized for panel shops, data center build-outs, and MRO stock rooms rather than a one-off repair.
7) Why use a locking clamp tie instead of a plain cable tie with a separate mount base?
A locking clamp tie puts the screw hole in the tie head itself, so one part does the job of a tie plus an adhesive or screw-applied mount base. That means one fastener, no adhesive to fail in a warm cabinet, and a mechanical hold on painted steel or drywall where stick-on bases tend to let go. Use a plain tie with a separate base when you want the bundle routed and the anchor located independently; use the PLC3S when the bundle is being pinned at a specific screw location.
8) What color and material are the Panduit PLC3S ties, and does color matter?
Molded in Nylon 6.6 in natural (off-white) color. Natural nylon is the general-purpose indoor grade; it is not the UV-stabilized formulation, which is why the indoor rating applies. If your spec calls for black weather-resistant nylon for a rooftop or exterior run, this is not the part.
9) Where is the Panduit Pan-Ty PLC3S manufactured?
Country of origin is Malaysia. It is ARRA compliant, which is the relevant flag for federally funded work, though buyers on Buy American projects should confirm which domestic-preference clause their contract carries.
How fast can I get the Panduit PLC1.5I-S8-M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Panduit PLC1.5I-S8-M come with a warranty?
Absolutely. The Panduit PLC1.5I-S8-M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Panduit PLC1.5I-S8-M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Panduit PLC1.5I-S8-M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!