You may also like
Klein Tools 1685-31 Parallel Jaw Grip 4-1/2-Inch Length
Model: KLN-1685-31
Parallel Jaw Grip 4-1/2-Inch Length
Warnings
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate...
Klein Tools
$697.94
$647.94
Klein Tools 1685-50C Parallel Jaw Grip for Coated Guy Strand
Model: KLN-1685-50C
Parallel Jaw Grip for Coated Guy Strand
Features
Round Inside-jaw Contour
Sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables and spring helps maintain cable...
Klein Tools
$939.84
$889.84
Klein Tools 1686-20 Knurled Parallel Jaw Grip 4-3/8-Inch Length
Model: KLN-1686-20
Knurled Parallel Jaw Grip 4-3/8-Inch Length
Features
Same as Cat. No. 1686-10, but with knurled jaws
Longer Jaw and Large Diameter Eye
Longer jaws achieve a firm hold, reducing possibility of...
Klein Tools
$898.64
$848.64
Klein Tools 1686-10 Parallel Jaw Grip, 4-3/8-Inch Length
Model: KLN-1686-10
Parallel Jaw Grip, 4-3/8-Inch Length
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper operation to...
Klein Tools
$877.51
$827.51
Parallel Jaw Grip 2-1/2-Inch Length
1685-20 - spec sheet
Features
- Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks
- Spring
- Made in USA
- Designed with a round inside-jaw contour for maximum contact to minimize conductor damage and lower serrated jaw to firmly grip insulated cables and conductors
- Design includes a latch that prevents the grip from falling in case of jaw disengagement from the cable
- Lightweight, compact grips pull an exceptionally wide range of cable sizes and types
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Always match proper size and type of grip to application.
1685-20 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.157" to 0.875" (3.98 to 22.22 mm)
- Cable Type:
- Messenger, EHS, Coated
- Depth:
- 10.3500 in
- Height:
- 1.4670 in
- Hot Latch:
- No
- Jaw Length:
- 2.5" (6.4 cm)
- Jaw Type:
- Round - Serrated
- Locking Handle:
- No
- Maximum Safe Load:
- 4500 lb (2041 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Parallel Jaw Grip
- Weight:
- 2.6280 lbs
- Width:
- 3.9420 in