Parallel Jaw Grip, 4-3/8-Inch Length
1686-10 - spec sheet
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Features
- When latch is closed, it helps maintain cable position in grip jaws
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Made in USA
- Longer Jaw and Large Diameter Eye
- Design includes a latch, plus a large-diameter eye that accommodates large hooks on hoists, winches and tackle blocks
- Longer jaws achieve a firm hold, reducing possibility of slippage and damage to cable
1686-10 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.2" to 0.4" (5.08 to 10.16 mm)
- Cable Type:
- Aircraft, Messenger, Guy Strand
- Depth:
- 7.2000 in
- Height:
- 1.8000 in
- Hot Latch:
- No
- Jaw Length:
- 4.375" (11.1 cm)
- Jaw Type:
- Double V
- Locking Handle:
- No
- Maximum Safe Load:
- 10,000 lb (4536 kg)
- Overall Length:
- 7.2" (18.3 cm)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Parallel Jaw Grip
- Weight:
- 4.6350 lbs
- Width:
- 4.5000 in