You may also like
Klein Tools 1685-20 Parallel Jaw Grip 2-1/2-Inch Length
Model: KLN-1685-20
Parallel Jaw Grip 2-1/2-Inch Length
Features
Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks
Spring
Made in USA
Designed with a round inside-jaw contour for maximum...
Klein Tools
$551.84
$501.84
Klein Tools 1685-50C Parallel Jaw Grip for Coated Guy Strand
Model: KLN-1685-50C
Parallel Jaw Grip for Coated Guy Strand
Features
Round Inside-jaw Contour
Sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables and spring helps maintain cable...
Klein Tools
$939.84
$889.84
Klein Tools 1686-10 Parallel Jaw Grip, 4-3/8-Inch Length
Model: KLN-1686-10
Parallel Jaw Grip, 4-3/8-Inch Length
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper operation to...
Klein Tools
$877.51
$827.51
Klein Tools 1686-20 Knurled Parallel Jaw Grip 4-3/8-Inch Length
Model: KLN-1686-20
Knurled Parallel Jaw Grip 4-3/8-Inch Length
Features
Same as Cat. No. 1686-10, but with knurled jaws
Longer Jaw and Large Diameter Eye
Longer jaws achieve a firm hold, reducing possibility of...
Klein Tools
$898.64
$848.64
Parallel Jaw Grip 4-1/2-Inch Length
1685-31 - spec sheet
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Features
- Made in USA
- Design includes a latch that prevents the grip from falling in case of jaw disengagement from the cable
- Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks
- Hot Latch, Spring
- Lightweight, compact grips pull an exceptionally wide range of cable sizes and types
- Designed with a round inside-jaw contour for maximum contact to minimize conductor damage and lower serrated jaw to firmly grip insulated cables and conductors
1685-31 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.625" to 1.25" (15.87 to 31.75 mm)
- Cable Type:
- Messenger, EHS, Guy Strand
- Depth:
- 11.7000 in
- Height:
- 1.8000 in
- Hot Latch:
- Yes
- Jaw Length:
- 4.5" (11.4 cm)
- Jaw Type:
- Round - Serrated
- Locking Handle:
- No
- Maximum Safe Load:
- 7500 lb (3400 kg)
- Overall Length:
- 11.7" (29.7 cm)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Compact
- Weight:
- 4.8240 lbs
- Width:
- 4.5000 in
- Department:
- Electrical
- Product Group:
- Tool Sets
- Product Subgroup:
- Tool Kits
- Product Type:
- Compact