Pass & Seymour 123PI Easy Wire...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.69
Pass & Seymour 123PI Easy Wire Non-Polarized Cord Plug, 10A-30A

Pass & Seymour 123PI Easy Wire Non-Polarized Cord Plug, 10A-30A

(No reviews yet) Write a Review

Model: PSE123-PI

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.69
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 123PI Easy Wire Non-Polarized Cord Plug

The Pass & Seymour Easy Wire Plug and Connector is a non-polarized cord plug engineered for fast, tool-friendly cord terminations on lamps, appliances, and light-duty cord sets. This family is available with amperage ratings from 10A to 30A at 125 volts, giving installers a single easy-wire platform that covers a range of cord-repair and replacement needs. Finished in Ivory and backed by UL Listing and CSA Listing compliance, this Pass & Seymour plug delivers the time-tested, quality-built performance that electrical professionals and maintenance teams rely on for consistent cord repairs and replacements across residential and light commercial settings.

Key Features

  • Selectable Amperage Rating: Choose from ratings of 10A to 30A at 125 volts to match your specific cord and load requirements.
  • Non-Polarized Design: Accepts cord insertion without blade-orientation concerns, simplifying easy-wire assembly and reducing installation time.
  • Compact Dimensions: Measures 0.75" wide by 1.38" high by 1.13" long for a low-profile fit on most cord types and enclosures.
  • Time-Tested Design: Proven easy-wire construction supports dependable, repeatable cord connections in the field.
  • Quality Materials & Durability: Built from quality materials for long-lasting, reliable service life under everyday handling.
  • Ivory Finish: Finished in Ivory to coordinate with common cord and device color schemes in residential and light commercial settings.

Certifications & Compliance

  • UL Listed
  • CSA Listing Compliant
  • Buy American Act Compliant

Technical Specifications

  • Voltage (AC): 125V
  • Amperage Options: 10A, 30A
  • UL Listing: Yes
  • CSA Listing: Yes
  • Country of Origin: China

Typical Applications

  • Lamp and Appliance Cord Repair
  • Cord Set Assembly and Replacement
  • Light-Duty Extension Cord Wiring
  • Replacement Plugs for Household Cords
  • Residential and Light Commercial Cord Maintenance
  • Maintenance and Facilities Cord Inventories

Why Pass & Seymour?

Pass & Seymour builds its Easy Wire Plug and Connector with quality materials and a time-tested design that installers can rely on for consistent, code-compliant cord connections across its full range of amperage options. With UL Listing, CSA Listing compliance, and Buy American Act status behind it, this Pass & Seymour plug is a dependable, well-documented choice for professionals and facilities teams handling everyday cord repairs and replacements, whether the job calls for a 10A or 30A rating.

[{"name": "Product Type", "value": "Plug"}, {"name": "Configuration", "value": "Non-Polarized"}, {"name": "Voltage Rating", "value": "125V"}, {"name": "Amperage Rating", "value": "10A-30A"}, {"name": "Finish", "value": "Ivory"}, {"name": "Listing", "value": "UL Listed"}, {"name": "Standards", "value": "CSA Listed"}, {"name": "Country of Origin", "value": "China"}]

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Straight Blade Plug
Voltage Rating:
125V
Configuration:
Non-Polarized
Listing:
UL Listed
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Plugs & Connectors

Pass & Seymour PSE123-PI – Frequently Asked Questions

1) What amperage ratings does the Pass & Seymour Easy Wire cord plug come in?
Two ratings, both at 125 volts: a 10A version (part 123-PI) and a 30A version (part 83-CC4). Pick the rating to match the cord and the load, not just the cord's plug cavity. The 10A covers lamp and small appliance cords; the 30A is for heavier cord sets.
2) Can I use this plug on hospital equipment cords?
No. The 123PI is a non-polarized, two-wire cord plug and carries no hospital grade designation. Patient-care areas require a hospital grade, green-dot plug. From what we stock, that means something like the Bryant 8266T hospital grade NEMA 5-15P, the Bryant 8395T angle hospital grade NEMA 5-20P, or the tamper-resistant Leviton 8215-CAT (5-15P) and 8315-CT (5-20P).
3) Is there a polarized alternative to the Pass & Seymour 123PI non-polarized cord plug?
Yes. The 123PI is built as a non-polarized plug, so the cord can be terminated without regard to blade orientation. When the load requires a polarized connection, the Leviton 5666-C is a 3-wire 2-pole polarized industrial grade straight blade plug rated 250 volts single phase. Confirm the receptacle configuration before swapping, since the Leviton is a 250V device and the 123PI is a 125V device.
4) The Pass & Seymour 123PI tops out below what my 50A cord set needs - what plug covers that?
The Pass & Seymour 123PI Easy Wire family is a 125V cord plug offered in 10A and 30A amperage ratings. For a larger cord set, the Bryant 7516NC is a rubber electrical plug in the NM10-50P series. Match the plug series to the receptacle configuration on the equipment before ordering.
5) I need a 3-pole 4-wire plug - will the Pass & Seymour 123PI work?
No. The 123PI Easy Wire plug is a non-polarized 125V cord plug for two-wire lamp and appliance cords. For a 3-pole 4-wire termination, the Leviton 275-E is a commercial grade 4-wire 3-pole straight blade angle plug. The angle body also helps where the cord must exit flat against a wall.
6) Do I need to strip and screw the wires on the Easy Wire plug?
No. The Easy Wire design is built for fast, tool-friendly cord termination, which is the point of the platform. Because it is non-polarized, the cord goes in without worrying about which conductor lands on which blade. That makes it a practical bulk item for a maintenance cart doing repeat lamp cord repairs.
7) Is this plug approved for commercial work in the US and Canada?
The Pass & Seymour Easy Wire cord plug is UL Listed and CSA Listed, so it is accepted on both sides of the border. It is intended for residential and light commercial cord repair, not for industrial or patient-care applications.
8) Is this plug suitable for outdoor or wet locations?
No. The 123PI is a non-polarized indoor cord plug for lamp, appliance, and light-duty cord sets. Nothing in its ratings covers wet or watertight service. For a watertight application, the Bryant 8666TSP is a watertight hospital-grade N6-15P plug.
9) Is the Pass & Seymour 123PI an industrial grade plug, or should I specify something heavier?
The 123PI Easy Wire plug is a UL Listed, CSA Listed non-polarized cord plug built for lamp, appliance, and light-duty cord work in residential and light commercial settings. For a specification-grade device on shop or plant cord sets, the Eaton Arrow Hart Ultra Grip straight blade plug is rated 15A 125V industrial specification grade, and the Leviton 5666-C is an industrial grade straight blade plug at 250V single phase.
10) What is the difference between the Pass & Seymour 123PI and a hospital-grade plug that looks similar?
Both terminate a flexible cord, but they are not interchangeable where a green dot device is required. The 123PI is a UL Listed, CSA Listed non-polarized 125V Easy Wire plug in Ivory for cord repair and cord set assembly. The Bryant 8266T is a hospital-grade NEMA 5-15P plug, and the Bryant 8395T is a hospital-grade NEMA 5-20P in an angle body. Hospital-grade devices are the ones specified for patient-care equipment cords.
11) Can the Pass & Seymour 123PI be used on a cord that runs through a wet or washdown area?
The 123PI Easy Wire plug is a general-purpose 125V non-polarized cord plug with no watertight rating stated for it, so it suits dry interior cord repair. Where the connection is exposed to moisture, the Bryant 8666TSP is a watertight hospital-grade plug in the N6-15P configuration. Note that the 8666TSP is a different blade configuration than a 125V straight blade device, so verify the receptacle.
12) What color is the Pass & Seymour 123PI, and will it match ivory cords?
Ivory, which lines up with the ivory lamp cord and ivory device colors common in residential and light commercial interiors. If your building is standardized on white or brown cords, the plug body will read slightly off against them.
How fast can I get the Pass & Seymour PSE123-PI delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PSE123-PI come with a warranty?
Absolutely. The Pass & Seymour PSE123-PI is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PSE123-PI?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PSE123-PI from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!