Pass & Seymour PS5269X 15A 125...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$70.03
$22.81
Pass & Seymour PS5269X 15A 125V Extra-Hard Use Spec-Grade Connector, Nylon Housing, Black/White

Pass & Seymour PS5269X 15A 125V Extra-Hard Use Spec-Grade Connector, Nylon Housing, Black/White

(No reviews yet) Write a Review

Model: PS5269-X

In Stock (leaves warehouse same day if ordered before 3pm ET)

$70.03
$22.81
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PS5269X 15A 125V Extra-Hard Use Spec-Grade Connector, Nylon Housing, Black/White

The Pass & Seymour PS5269X is a 15A, 125V Extra-Hard Use Spec-Grade Connector finished in black and white, built for demanding cord-and-plug applications where reliability matters. It ships completely ready-to-wire to cut installation time, and its rugged nylon housing delivers impact and chemical resistance for tough job-site environments. Heavy-duty brass alloy blades and contacts resist heat rise and maintain excellent conductivity, making this connector a dependable choice for extra-hard use power connections.

Key Features

  • Electrical Rating: Rated 15A, 125V for extra-hard use power connection applications.
  • Ready-to-Wire Design: Arrives completely ready-to-wire, cutting installation time significantly.
  • Tri-Drive Assembly Screws: Standard on all Specification Grade plugs and connectors for secure, repeatable assembly.
  • Same-Plane Terminals: All 3-wire terminals located on the same plane, allowing quick wire termination from any angle.
  • Durable Construction: Nylon housing provides impact and chemical resistance for long service life.
  • Cord Grip: Rugged two-piece cord grip provides more uniform cord retention, with recessed cord-grip screws that protect installers against screwdriver head slippage.
  • Contacts: Heavy-duty brass alloy blades and contacts resist heat rise and provide excellent conductivity.
  • Internal Dust Shield: Keeps terminals free of contaminants for reliable long-term performance.

Technical Specifications

  • Country Of Origin: Mexico
  • Product Length: 2.638 in
  • Product Line: Pass & Seymour
  • Product Width: 1.516 in

Typical Applications

  • Commercial and Industrial Power Distribution
  • Extra-Hard Use Cord and Plug Connections
  • Portable Equipment and Tool Power Connections
  • Construction and Temporary Power Setups
  • Renovation and New Electrical Installations

Why Pass & Seymour?

Pass & Seymour spec-grade connectors like the PS5269X combine impact-resistant nylon housings, heavy-duty brass alloy contacts, and a ready-to-wire tri-drive assembly to deliver dependable performance for extra-hard use power connections. The same-plane terminal layout and internal dust shield help installers work faster while keeping connections clean and reliable for demanding commercial and industrial electrical work.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Straight Blade Connector
Voltage Rating:
125V
Amperage Rating:
15A
Product Material:
Nylon
Product Color:
Black/White
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Plugs & Connectors
Product Length:
2.638 in
Product Width:
1.516 in

Pass & Seymour PS5269-X – Frequently Asked Questions

1) What amperage and voltage is the Pass & Seymour PS5269X connector rated for?
The PS5269X is a 15A, 125V connector built for extra-hard use cord-and-plug work. That rating covers standard 125V single-phase circuits feeding portable tools, temporary power setups and commercial power distribution. If your cord set or equipment draws more than 15 amps, you need a 20A device instead, not this one.
2) Is this a female connector (cord-end receptacle) or a plug?
It is a connector, the female cord-mounted body that a plug inserts into. Pass & Seymour sells the matching male plug separately, so if you are building a cord set you order both ends. The PS5269X terminates the end of the cord that accepts equipment plugs.
3) Is the Pass & Seymour PS5269X hospital grade?
No. The PS5269X is specification grade for extra-hard use, which is a different category from hospital grade. If your facility requires hospital grade on patient-care cord sets, look at the Bryant 8269T, a hospital grade NEMA 5-15R connector, or the Leviton 8319-C hospital grade NEMA 5-20R connector. Do not substitute a spec-grade device where the drawing calls out hospital grade.
4) What else could I use instead of the PS5269X for a 15A 125V cord end?
The closest cross-brand equivalent we carry is the Eaton Arrow Hart Severe Duty straight blade connector, 15A 125V, NEMA 5-15R. If the cord set needs to carry 20 amps rather than 15, the Leviton 15W33 industrial grade straight blade connector is 125V 20A, 3-wire 2-pole. Note that a 20A device is not a drop-in for a 15A circuit design, so match the device to the cord and breaker.
5) Will this connector hold up on a construction site or in a wash-down area?
The housing is nylon, which gives impact and chemical resistance, and the blades and contacts are heavy-duty brass alloy that resists heat rise. An internal dust shield keeps the terminals clear of contaminants. It is specified for extra-hard use, which is the category for construction and temporary power, not a general-purpose residential device.
6) How hard is the PS5269X to wire up in the field?
It arrives completely ready-to-wire, so there is no pre-assembly. All three wire terminals sit on the same plane, meaning you can land conductors from any angle without rotating the body. The two-piece cord grip uses recessed screws so a slipping screwdriver does not score the housing or your hand, and tri-drive assembly screws let you reassemble with whichever bit you have on you.
7) How many wires does the PS5269X terminate, and does it include a ground?
It is a 3-wire device: hot, neutral and equipment ground, all landed on terminals set in the same plane. That makes it the grounding-type cord end you want for tools and portable equipment on a 125V circuit.
8) What is the difference between spec grade, industrial grade, and hospital grade connectors in this 125V family?
They are separate grade tiers. The Pass & Seymour PS5269X is spec grade built for extra-hard use, with a nylon housing and brass alloy contacts. The Leviton 15W33 is classed industrial grade. The Bryant 8269T and Leviton 8319-C are hospital grade, which is the designation facilities require for patient-care areas. Match the grade to what the specification on the job calls out rather than assuming the ratings interchange.
9) Is a hospital grade 5-15R connector a drop-in substitute for the PS5269X on a job-site extension cord?
Electrically it is the same 15A 125V NEMA 5-15R configuration, so the Bryant 8269T hospital grade connector will mate with the same plugs as the PS5269X. The difference is the grade: hospital grade is built and tested to the requirements for patient-care use, while the PS5269X is a spec-grade extra-hard use device intended for construction, temporary power, and portable tool cords. If a contract specifies spec grade for the trade package, the hospital grade part is a different line item, not an identical one.
10) What size is the PS5269X body, and what color is it?
The connector body measures 2.638 inches long by 1.516 inches wide, so it fits the hand and the typical cord reel or panel cutout you would run it into. Finish is black and white, which is the standard spec-grade cord-end look for commercial and industrial jobs.
11) What is the exact part number for this Pass & Seymour spec-grade connector?
Order it as Pass & Seymour PS5269-X, listed as the PS5269X model. It is made in Mexico. Distributors cross-referencing the Legrand line should use that manufacturer number when matching against Pass & Seymour spec-grade plug and connector catalog data.
How fast can I get the Pass & Seymour PS5269-X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS5269-X come with a warranty?
Absolutely. The Pass & Seymour PS5269-X is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS5269-X?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS5269-X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!