Pass & Seymour PS5669X 15A 250...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$115.74
$73.59
Pass & Seymour PS5669X 15A 250V Spec-Grade Connector, Nylon Housing

Pass & Seymour PS5669X 15A 250V Spec-Grade Connector, Nylon Housing

(No reviews yet) Write a Review

Model: PS5669-X

In Stock (leaves warehouse same day if ordered before 3pm ET)

$115.74
$73.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PS5669X 15A 250V Spec-Grade Connector, Nylon Housing

The Pass & Seymour PS5669X is a 15A, 250V Extra-Hard Use Spec-Grade connector finished in black and white, built for demanding commercial and industrial cord-connection applications. It arrives completely ready-to-wire to cut installation time, and its heavy-duty nylon housing delivers impact and chemical resistance for tough job-site conditions. The connector is cULus Listed and Federal Spec Listed for use where specification-grade reliability is required.

Key Features

  • Electrical Rating: Rated 15A, 250V for extra-hard use cord-connection applications.
  • Durable Construction: Nylon housing provides impact and chemical resistance in demanding environments.
  • Ready-to-Wire Design: Unit arrives completely ready-to-wire, cutting installation time significantly.
  • Cord Grip: Rugged two-piece cord grip provides more uniform cord retention, with recessed cord-grip screws that protect installers against screwdriver head slippage.
  • Internal Dust Shield: Keeps terminals free of contaminants for reliable long-term performance.
  • Tri-Drive Assembly Screws: Standard on all Specification Grade plugs and connectors for secure assembly.
  • Terminal Layout: All 3-wire terminals located on the same plane, allowing quick wire termination from any angle.
  • Contacts: Heavy-duty brass alloy blades and contacts resist heat rise and provide excellent conductivity.

Certifications & Compliance

  • cULus Listed
  • Federal Spec Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Length: 1.752 in
  • Product Line: Pass & Seymour
  • Product Width: 1.516 in

Typical Applications

  • Commercial and Industrial Cord-Connector Applications
  • Extra-Hard Use Portable Cord Sets
  • Specification-Grade Electrical Installations
  • Renovation and New Construction Wiring Projects

Why Pass & Seymour?

Pass & Seymour builds the PS5669X with a nylon housing, heavy-duty brass alloy blades and contacts, and a rugged two-piece cord grip for consistent, code-compliant performance. Backed by cULus and Federal Spec listings, this Specification Grade connector is engineered for reliable, ready-to-wire installation on demanding professional electrical jobs.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Straight Blade Connector
Product Material:
Nylon
Product Color:
Black and White
Voltage Rating:
250V
Amperage Rating:
15A
Listing:
cULus
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Plugs & Connectors
Product Length:
1.752 in
Product Width:
1.516 in

Pass & Seymour PS5669-X – Frequently Asked Questions

1) Does the PS5669X connector carry a UL listing for a spec-grade commercial job?
It is cULus Listed and also Federal Spec Listed, which covers the specification-grade reliability language that shows up on commercial and government submittals.
2) What should I use instead of the PS5669X on a patient-care-area cord set?
Health care facility rules call for hospital grade cord-connected devices in patient care areas. The Pass & Seymour PS5669X is a Specification Grade connector, not hospital grade. For hospital grade cord connectors, the Bryant 8269T is a hospital grade NEMA 5-15R connector and the Leviton 8319-C is a hospital grade NEMA 5-20R connector in black. Both of those are 125V configurations, so confirm the cord cap and receptacle configuration before ordering.
3) How many wires does the PS5669X connector terminate, and is it awkward to wire in the field?
It is a 3-wire device, and all three terminals sit on the same plane so you can land wires from any angle without rotating the body. The unit ships completely ready-to-wire, and the cord-grip screws are recessed so a screwdriver does not slip off the head while you torque the grip. Tri-Drive assembly screws are standard on the spec grade plugs and connectors.
4) Is the PS5669X a cord-mounted female connector or a panel receptacle?
It is a cord-connector, the female end that goes on flexible cord, with a two-piece cord grip clamping the jacket. It is not a flush or panel-mount receptacle, so it is used to build or repair portable cord sets rather than to feed a wall box.
5) How does the Pass & Seymour PS5669X differ from an industrial grade connector like the Leviton 15W33?
The PS5669X is a Specification Grade, extra-hard use connector with a nylon housing for impact and chemical resistance, heavy-duty brass alloy blades and contacts, an internal dust shield, and a two-piece cord grip, rated 15A 250V and cULus Listed. The Leviton 15W33 is classified as industrial grade and is a 3-wire 2-pole connector rated 125V 20A. The practical split is voltage and amperage: the Leviton covers 125V 20A cord sets, the PS5669X covers 15A 250V.
6) What size is the Pass & Seymour PS5669X connector body, and will it fit in a tight enclosure or strain-relief boot?
Published dimensions are 1.752 in length and 1.516 in width, so plan around that footprint when the cord end has to pass through a guard or sit in a confined space.
7) Where is the Pass & Seymour PS5669X made, and what is the exact part number to order?
Order it as Pass & Seymour PS5669X, manufacturer part number PS5669-X. Country of origin is Mexico, which is the detail procurement groups with domestic-content or trade-compliance reporting usually ask for.
8) Does a severe duty connector offer anything the PS5669X does not?
The Eaton Arrow Hart unit is graded severe duty and is a 15A 125V NEMA 5-15R connector. The Pass & Seymour PS5669X is Specification Grade rated for extra-hard use, with a nylon housing for impact and chemical resistance and recessed cord-grip screws. The decision is usually made on the electrical side rather than the grade label: the Eaton serves 125V 5-15R cords, the PS5669X serves 15A 250V cords.
9) What color is the PS5669X connector, and does that matter for matching devices already in service?
The PS5669X is finished in black and white. If a facility standardizes on an all-black cord end, the Leviton 8319-C is listed as black, though that one is a hospital grade 5-20R device rather than a 250V spec grade connector.
How fast can I get the Pass & Seymour PS5669-X delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS5669-X come with a warranty?
Absolutely. The Pass & Seymour PS5669-X is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS5669-X?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS5669-X from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!