You may also like
Pass & Seymour TR5251W 15A 125V Spec-Grade Tamper-Resistant Receptacle, White
Model: PSE-TR5251-W
Pass & Seymour TR5251W 15A 125V Spec-Grade Tamper-Resistant Receptacle, WhiteThe Pass & Seymour TR5251W is a 15A 125V Construction Spec-Grade tamper-resistant single receptacle built for back and...
Pass & Seymour
$62.66
$14.56
Pass & Seymour PTTR26262W PlugTail Spec-Grade Tamper-Resistant Decorator Duplex Receptacle, 15A/125V, White
The Pass & Seymour PTTR26262W is a PlugTail Spec-Grade Tamper-Resistant Decorator Duplex Receptacle rated 15A 125V, engineered for reliable performance in commercial and residential electrical systems. Finished in White with a Matte finish, this receptacle is cULus Listed and Federal Spec Listed, meeting the code requirements professionals rely on for spec-grade installations. The PlugTail connector system replaces standard pigtail wiring with a pre-wired, welded lead for faster, more consistent terminations on every job.
Key Features
- Electrical Rating: 15A 125V for standard duplex receptacle circuits.
- PlugTail Design: Pre-wired with one welded, pre-stripped wire lead to facilitate switched receptacle circuit applications, faster to terminate than standard pigtails.
- Durable Contacts: Large brass terminal blades and .036 inch thick, brass, triple-wipe power contacts ensure consistent, reliable electrical connections and lasting retention.
- Auto-Ground Clip: Assures positive ground for safe, code-compliant installation.
- Finger-Safe Housing: Ultrasonically welded polycarbonate connector housing secures terminations and conductors in a UL Listed, finger-safe design with no exposed terminals before, during, and after installation.
- Crimped and Welded Contacts: Deliver long-term connection integrity in demanding environments.
- Tamper-Resistant Decorator Style: Duplex receptacle configuration suited for spec-grade commercial and residential wiring device applications.
- Finish: White with a Matte finish for a clean, professional appearance.
Certifications & Compliance
- Federal Spec Listed
- cULus Listed
Technical Specifications
- Country Of Origin: Mexico
- Product Finish: Matte
- Product Height: 2.75 in
- Product Line: Pass & Seymour
- Product Width: 1.5 in
- Product Depth: 0.875 in
Typical Applications
- Commercial and Residential Electrical Wiring
- Switched Receptacle Circuit Applications
- Tamper-Resistant Code-Required Installations (Kitchens, Bathrooms, and Similar Spaces)
- Spec-Grade Decorator Style Duplex Outlets
- New Construction and Renovation Wiring Projects
Why Pass & Seymour?
Pass & Seymour engineers the PlugTail PTTR26262W with large brass terminal blades, .036 inch thick triple-wipe power contacts, an auto-ground clip, and a finger-safe, ultrasonically welded polycarbonate connector housing for dependable, code-compliant performance. Backed by Federal Spec Listing and cULus Listing, this tamper-resistant decorator receptacle delivers the consistent, crimped and welded connections professionals expect from spec-grade wiring devices on every installation.
Manufacturer Resources
Spec Sheet
Product Specs
- Product Type:
- Duplex Receptacle
- Voltage Rating:
- 125V
- Amperage Rating:
- 15A
- Product Color:
- White
- Listing:
- cULus
- Series:
- PlugTail
- Product Finish:
- Matte
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Receptacles & Outlets
- Product Width:
- 1.5 in
- Product Height:
- 2.75 in
- Product Depth:
- 0.875 in
Pass & Seymour PTTR26262-W – Frequently Asked Questions
1) Does the Pass & Seymour PTTR26262W PlugTail receptacle need a separate PlugTail connector, or does it wire like a normal receptacle?
The PlugTail design is a two-piece system: the device body has no screw terminals you wire in the box. It comes with one welded, pre-stripped wire lead and mates to an ultrasonically welded polycarbonate connector housing that holds the terminations and conductors in a finger-safe arrangement with no exposed terminals before, during, or after installation. If the box was not already roughed in with a matching PlugTail connector, you need that connector as part of the job. For a conventional screw-and-pressure-plate device instead, a straight commercial receptacle such as the Leviton 16251 commercial grade straight blade receptacle wires the usual way.
2) Is the PTTR26262W a 15 amp or 20 amp receptacle, and can I use it on a 20A circuit?
It is rated 15A at 125V. A 15A duplex receptacle is permitted on a 20A branch circuit when more than one receptacle is on the circuit, but if the design calls for a 20A receptacle on a dedicated circuit you need a 5-20R device instead, such as the Leviton 16342 Decora Plus commercial grade 20A 125V NEMA 5-20R duplex or the Leviton 16352 commercial grade 20A 125V 5-20R duplex.
3) Does this Pass & Seymour receptacle meet the tamper-resistant requirement for dwelling unit outlets?
Yes, the PTTR26262W is a tamper-resistant device, which is what code-required TR locations call for in dwelling spaces including kitchens and bathrooms. It is cULus Listed and Federal Spec Listed.
4) Can the PTTR26262W be used in a hazardous or wet industrial location?
The Pass & Seymour PTTR26262W is a cULus Listed spec-grade wiring device intended for commercial and residential wiring, switched receptacle circuits, and tamper-resistant code-required rooms such as kitchens and bathrooms. For classified areas, the Appleton FSQC series is an interlocked explosionproof receptacle, and the Appleton U-Line ECS set is a factory-sealed 15 and 20 amp plug and receptacle set, 3-pole.
5) What 15A 125V duplex receptacle can be used instead of the Pass & Seymour PTTR26262W when the circuit does not need tamper-resistant shutters or a PlugTail connector?
The Eaton Arrow Hart 5262W is a heavy-duty industrial duplex receptacle rated 15A 125V with a NEMA 5-15R configuration, in gray. It is an industrial specification grade device wired with conventional screw terminations rather than the pre-wired welded lead of the PlugTail PTTR26262W, and it is not a tamper-resistant device. The PTTR26262W is white with a matte finish and is tamper-resistant decorator style.
6) Is the PlugTail PTTR26262W acceptable for patient care areas, or do I need a different receptacle?
The PTTR26262W is a spec-grade tamper-resistant decorator duplex device, cULus Listed and Federal Spec Listed. Where a hospital grade device is specified, the Leviton 16262-HGW is a hospital grade duplex receptacle in white, supplied in packs of 100 for facility-wide standardization.
7) Will the PTTR26262W fit a standard decorator wall plate?
It is a decorator style duplex, so it takes a standard rectangular decorator/screwless decorator plate, not a duplex plate with two round openings. The device measures 2.75 in high, 1.5 in wide and 0.875 in deep, and the finish is white with a matte texture, so it matches white matte decorator plates on adjacent openings.
8) Why does this PlugTail receptacle have a single pigtail lead on it?
The welded, pre-stripped lead is there for switched receptacle circuits, where one half of the duplex is fed from a switch leg. It replaces the pigtail an electrician would otherwise splice on, and because it is welded at the factory it terminates faster and more consistently than a field-made pigtail.
9) Is a PlugTail spec-grade receptacle good enough for a commercial corridor or tenant fit-out, or do I need hospital grade?
Spec grade covers general commercial and residential wiring, with .036 inch thick brass triple-wipe power contacts, large brass terminal blades and an auto-ground clip for positive grounding. For patient care areas that require a hospital grade device, specify one instead, such as the Leviton 16262-HGW hospital grade duplex in white. For industrial specification grade duty, the Eaton Arrow Hart heavy-duty industrial 15A 125V 5-15R duplex is the comparable.
10) I need to standardize receptacles across a multi-family building. What part number do I order for white tamper-resistant 15A decorator outlets?
Order Pass & Seymour PTTR26262-W. It is a single configuration: 15A/125V tamper-resistant PlugTail decorator duplex in white matte, so every opening gets the same device. Keep in mind each one needs the matching PlugTail connector in the box to land the branch conductors.
11) I need more than two outlets at one box - is there an alternative to the PTTR26262W?
The Bryant 21254IGO is a quad straight-blade receptacle in a NEMA 5-20R configuration rated 20A, giving four outlets in place of the two on the Pass & Seymour PTTR26262W duplex device. Note the amperage difference: the PTTR26262W is a 15A 125V device.
12) Will a Bryant 5362B work as a substitute for the Pass & Seymour PTTR26262W?
The Bryant 5362B is a heavy-duty duplex receptacle rated 20A 125V, and the 5362BI is the same 20A 125V heavy-duty duplex device in a different color designation. Both are rated above the 15A 125V of the PTTR26262W and neither is a tamper-resistant PlugTail device, so they do not carry the pre-wired welded connector lead or the shutter mechanism the PTTR26262W provides.
13) Do I still need to run a separate ground pigtail to the device with this receptacle?
No separate ground jumper to the yoke is needed. The device uses an auto-ground clip that establishes a positive ground path to a grounded metal box, so grounding is made on install without an extra bonding conductor at the device.
14) Which receptacle holds up better to impact in a high-abuse corridor than a standard spec-grade device?
The Leviton 16251W is a commercial grade heavy-duty impact-resistant straight blade receptacle, built for abuse resistance. The Pass & Seymour PTTR26262W is a spec-grade device with .036 inch thick brass triple-wipe power contacts and an ultrasonically welded polycarbonate connector housing, plus tamper-resistant shutters that the 16251W does not provide.
How fast can I get the Pass & Seymour PTTR26262-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PTTR26262-W come with a warranty?
Absolutely. The Pass & Seymour PTTR26262-W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PTTR26262-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PTTR26262-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.