Pass & Seymour SB2 Two-Gang To...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.21
Pass & Seymour SB2 Two-Gang Toggle Brass Wall Plate

Pass & Seymour SB2 Two-Gang Toggle Brass Wall Plate

(No reviews yet) Write a Review

Model: SB-2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour SB2 Two-Gang Toggle Brass Wall Plate

The Pass & Seymour SB2 Two-Gang Toggle Brass Wall Plate is a smooth metal wall plate punched for two-gang toggle switch openings. Constructed of a 70% copper, 30% zinc brass alloy at .040" thick, it delivers a warm, appealing finish suited to modern decor as well as retrofit applications. The plate is UL Listed and CSA Listed, and it is manufactured to meet Buy American Act compliance for professional and government-spec electrical projects.

Key Features

  • Two-Gang Configuration: Openings punched for toggle switches, sized for two-gang capacity applications.
  • Durable Brass Construction: 70% copper, 30% zinc alloy at .040" thick, giving a warm, appealing finish for modern decor and retrofit installations.
  • Corrosion-Resistant Finish: Lacquered to prevent corrosion and paintable to match plastic plates when a custom look is needed.
  • Custom Options Available: Can be silk-screened or engraved, and custom punched with over 300 opening styles.
  • Finish-Matching Hardware: Packaged in protective film with finish-matching screws for a clean, coordinated installation.
  • Buy American Act Compliant: Meets Buy American Act compliance standards for qualifying government and institutional projects.

Certifications & Compliance

  • UL Listed
  • CSA Listed
  • Buy American Act Compliant

Technical Specifications

  • cURus: No
  • CUL Listing No: No
  • UL Listing No: Yes
  • CSA Listing Info: Yes
  • cULus: No
  • UR: No
  • Federal Spec: No

Typical Applications

  • Two-Gang Toggle Switch Installations
  • Commercial and Residential Wall Plate Replacement
  • Modern Decor and Retrofit Applications
  • New Construction Electrical Finishing

Why Pass & Seymour?

Pass & Seymour builds this brass wall plate from a corrosion-resistant, lacquered 70/30 copper-zinc alloy at .040" thickness, backed by UL and CSA listing for code-compliant performance. Combined with Buy American Act compliance and finish-matching hardware in every package, it's a reliable choice for professional electrical finishing work.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Toggle Wallplate
Configuration:
Two-Gang
Listing:
UL Listed
Standards:
CSA Listed
Country of Origin:
United States
Product Material:
Brass
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Wallplates

Pass & Seymour SB-2 – Frequently Asked Questions

1) Will the Pass & Seymour SB2 brass plate cover two toggle switches side by side?
Yes. The SB2 is punched for two toggle switch openings in a two-gang configuration, so it covers a standard two-gang box with two toggle (standard switch) devices. It will not fit decorator/rocker devices or duplex receptacles, since the openings are toggle-shaped only. For a two-gang opening with mixed device types, a combination plate like the Mulberry 76432 steel 2-gang combination wallplate is the right style instead.
2) Does the SB2 wall plate qualify for a Buy American government project?
Yes. The SB2 is manufactured to meet Buy American Act compliance and is made in the United States, which is what agency and institutional specs normally ask for. It is also UL Listed and CSA Listed for code work on both sides of the border.
3) I am replacing an old plate on a two-gang switch box in a retrofit. Will the SB2 work?
It will, provided the devices behind it are standard toggle switches. The SB2 is a smooth metal plate punched for a two-gang toggle pattern and the description calls out retrofit use alongside new construction. Metal plates are screwed to the device yokes, so the switches need to be mounted straight and flush in the box for the brass face to sit flat.
4) What is a two-gang metal wall plate alternative to the Pass & Seymour SB2 brass plate?
The Pass & Seymour SB2 is a brass two-gang plate. For a metal two-gang plate in a painted white finish instead of brass, Mulberry offers the 76432 (764 Series) and the 76532 (765 Series), both cold rolled steel 2-gang combination wallplates in white. The difference is material and look: the SB2 is a lacquered brass alloy plate, while the Mulberry plates are steel in white, and the Mulberry units are combination-punched rather than punched for two toggle switches.
5) Will the Pass & Seymour SB2 work if my opening is a single switch or three gangs?
No. The SB2 is punched for two-gang toggle switch openings only. For a single toggle opening, the Cantex 5133330 is a PVC single toggle switch wallplate and the Mulberry 41020 is a 1-gang toggle switch plate from the 4102 Series in gas burner red. For three gangs, the Eaton 7729V-SP is a decorator triple-gang wallplate cover and the Mulberry 76103 is a Princess size 3-gang steel plate punched for three duplex receptacles.
6) Which of these two-gang plates looks like a substitute for the SB2 but will not fit a pair of toggle switches?
The Leviton PJ23-E is a 2-gang plate but it is a blank wallplate, so it has no device openings at all and cannot cover two toggle switches. The Mulberry 76432 and 76532 are 2-gang combination plates, meaning their openings are punched for a mix of device types rather than two toggles. The Pass & Seymour SB2 is punched specifically for two toggle switch openings.
7) For a Buy American government job, how does the SB2 compare with the other wall plates?
The Pass & Seymour SB2 is made in the United States and is manufactured to meet Buy American Act compliance, and it carries both UL and CSA listing. Among the alternatives, the Leviton 80704 and PJ2-E are described as commercial grade thermoplastic nylon plates and the Mulberry 764 and 765 Series are cold rolled steel, which speak to construction and grade rather than domestic-content compliance. If the specification calls for Buy American content, the SB2 is the one in this group that states it.
8) What is the Pass & Seymour SB2 wall plate made of, and will it tarnish?
It is a brass plate, 70% copper and 30% zinc alloy at .040 inch thick, finished with a lacquer coat to resist corrosion. The lacquer is what keeps the brass from tarnishing in service, so avoid abrasive cleaners that cut through it.
9) Does the brass SB2 plate come with screws, or do I need to supply them?
Mounting screws are included and they are finish-matched to the brass plate, so you are not hunting for matching hardware. Each plate ships in a protective film to keep the lacquered face clean until it is installed.
10) Is a brass wall plate worth it over a nylon or steel two-gang plate?
It comes down to appearance and the spec. The Pass & Seymour SB2 is solid 70/30 brass, lacquered, and meant to be seen, which is why it shows up in hospitality, lobby and high-end residential work. If the plate is in a back-of-house or utility area and only needs to be durable and white, a commercial grade nylon plate such as the Leviton PJ2-E 2-gang midway, or a painted steel plate like the Mulberry 76532, does the same job without the decorative finish. Note the nylon and steel options named here are combination or midway styles, not toggle-punched standard brass.
11) I need a lower-cost two-gang plate instead of brass - what are my options?
For a non-metal two-gang plate, Leviton offers the PJ2-E thermoplastic nylon 2-gang midway wallplate in commercial grade. If one of the two openings should be covered rather than fitted with a device, the Leviton PJ23-E is a thermoplastic nylon 2-gang blank wallplate, commercial grade, box mount in midway size. Both are plastic rather than the Pass & Seymour SB2's .040 inch brass alloy, so they will not carry the brass appearance or the paintable lacquered metal surface.
12) My switches are decorator style, not toggle - what plate should I use instead of the SB2?
The SB2 is punched for toggle switch openings, which will not fit a rocker or decorator device. For decorator openings, the Leviton 16252 is a Decora single-gang device wallplate, supplied in a pack of 100, and the Eaton 7729V-SP is a decorator triple-gang wallplate cover. Both use the larger rectangular decorator opening rather than the narrow toggle slot.
13) I need a plate for a phone or data jack - can I use the Pass & Seymour SB2?
No, the SB2 is punched for two toggle switch openings. For voice and data, the Eaton 35324W is a wallplate with a 4-conductor data/voice modular jack, Type 625B4, and the Eaton 3533-4W is a white thermoplastic surface mount telephone jack wallplate for RJ11/RJ14. Those come with the jack built in, where the SB2 is a smooth punched plate with no device.
14) Can the Pass & Seymour SB2 brass plate be painted or engraved for labeling?
Both. The lacquered brass face is paintable if you need it to blend with plastic plates, and the plate can be silk-screened or engraved for circuit or equipment labeling. Pass & Seymour also offers custom punching in over 300 opening styles if the two-gang toggle pattern is not what your devices need.
15) What part number do I order for the Pass & Seymour two-gang brass toggle plate?
Order Pass & Seymour SB-2. That is the two-gang toggle version in brass; it is a single configuration, so there are no finish or size options to specify.
16) Can I mix the SB2 with Bryant wall plates on the same job?
The Bryant options are single-gang or series-specific rather than two-gang toggle: the NP26W is an HWS Series P26W 1-gang wallplate, the P8-P is a P8 Series 1-gang duplex wallplate, and the PJ is an M-size wallplate for wiring devices. They can be used alongside the Pass & Seymour SB2 on other openings, but none of them substitutes for the SB2's two-gang toggle punch, and the SB2 is brass while the Bryant plates are their own series finishes.
How fast can I get the Pass & Seymour SB-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour SB-2 come with a warranty?
Absolutely. The Pass & Seymour SB-2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour SB-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour SB-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!