You may also like
Pass & Seymour TP5W TradeMaster 5-Gang Nylon Toggle Wall Plate, White
Model: PSE-TP5-W
Pass & Seymour TP5W TradeMaster 5-Gang Nylon Toggle Wall Plate, WhiteThe Pass & Seymour TP5W is a TradeMaster 5-Gang wall plate molded of rugged, self-extinguishing nylon with 5 toggle switch...
Pass & Seymour
$54.34
$28.27
Pass & Seymour SB4 Four-Gang Toggle Wall Plate, Brass
The Pass & Seymour SB4 wall plate is a four-gang toggle switch cover built from solid brass for demanding commercial and residential installations. Machined from a 70% copper, 30% zinc alloy at .040" thick, this plate delivers a warm, appealing finish that suits both modern decor and retrofit applications. It is lacquered to prevent corrosion and is RoHS compliant, UL Listed, and CSA Listed, making it a dependable choice for professional electrical work where four toggle switch openings need to be covered cleanly and durably.
Key Features
- Four-Gang Toggle Configuration: Openings sized for four toggle switches, ideal for multi-switch panels and lighting control locations.
- Durable Brass Construction: Solid brass, .040" thick, made from a 70% copper / 30% zinc alloy for a warm, appealing finish on modern or retrofit walls.
- Corrosion-Resistant Lacquer: Lacquered finish helps prevent corrosion and tarnishing over time.
- Finish-Matching Hardware: Packaged with finish-matching screws for a clean, coordinated installation.
- Custom Decoration Ready: Can be silk-screened or engraved for custom identification or branding needs.
- Paintable Surface: Can be painted to match surrounding plastic plates when a uniform look is required.
- Protective Packaging: Shipped wrapped in protective film to guard the finish prior to installation.
Certifications & Compliance
- UL Listed
- CSA Listed
- RoHS Compliant
- Buy American Act Compliant
Technical Specifications
- CUL Listing No: No
- UL Listing No: Yes
- CSA Listing Info: Yes
- RoHS: Yes
- cURus: No
- cULus: No
- UR: No
- Federal Spec: No
Typical Applications
- Commercial and Residential Wiring Installations
- Multi-Switch Lighting Control Panels
- Retrofit and New Construction Wall Plate Replacement
- Decorative and Functional Toggle Switch Covers
- Panel and Multi-Gang Switch Banks
Why Pass & Seymour?
Pass & Seymour builds the SB4 wall plate from solid brass with a corrosion-resistant lacquer finish, giving installers a durable, code-compliant cover for four-gang toggle switch openings. With UL and CSA listing, RoHS compliance, and Buy American Act compliant manufacturing, this plate is engineered for reliable, long-term performance in professional electrical installations.
Manufacturer Resources
Spec Sheet
Product Specs
- list_batch:
- PASS-20260820
- Product Type:
- Toggle Wallplate
- Configuration:
- Four-Gang
- Listing:
- UL Listed
- Standards:
- UL-CSA
- Country Of Origin:
- United States
- Series:
- SB4
- Product Material:
- Brass
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Wallplates
Pass & Seymour SB-4 – Frequently Asked Questions
1) Will the Pass & Seymour SB4 brass plate fit four standard toggle switches?
Yes. The SB4 is a four-gang plate with openings sized for standard toggle switches, so it covers a bank of four toggles in one ganged box. It will not fit decorator/rocker (Decora style) devices, GFCIs, or duplex receptacles, those need the matching opening style instead.
2) Is the SB4 solid brass or brass-plated steel?
Solid brass, not plated. It is machined from a 70 percent copper, 30 percent zinc alloy at .040 inch thick, and finished with lacquer to slow corrosion and tarnishing. That matters on exterior-adjacent corridors, kitchens, and coastal buildings where a plated plate eventually shows through at the screw holes.
3) Is the Pass & Seymour SB4 wall plate UL Listed and acceptable for commercial work?
The SB4 is UL Listed and CSA Listed, covering both US and Canadian installations, and it is RoHS compliant. For federal and institutional jobs, it is also Buy American Act compliant and made in the United States.
4) Do I need to buy screws separately for this brass wall plate?
No. The SB4 ships with finish-matching screws, so the mounting hardware blends with the brass face rather than showing a chrome or painted head. The plate also arrives wrapped in protective film to keep the finish clean until it is installed.
5) Can brass wall plates be painted to match the plastic plates already in the building?
Yes, the SB4 brass face can be painted, which is the usual move when a few openings get brass plates but the rest of the floor is plastic and you want one uniform look. It can also be silk-screened or engraved if you need circuit or zone identification on a multi-switch bank.
6) What part number do I order for a four-gang brass toggle plate from Pass & Seymour?
Order Pass & Seymour SB-4. The SB prefix is the solid brass toggle series and the 4 is the gang count, so the four-gang version of a brass toggle plate is SB-4.
7) Is a brass toggle plate suitable for retrofitting old switch banks, or only new construction?
Both. The SB4 is used on retrofit and new construction alike, including multi-switch lighting control locations and panel-area switch banks. For retrofit, the only thing to confirm is that the existing devices are standard toggles and the box is a true four-gang, since the plate's openings are fixed at four toggle positions.
8) Will this brass plate tarnish in a hotel corridor or restaurant kitchen?
The brass is lacquered specifically to resist corrosion and tarnishing, which is why it holds up better than bare brass in high-humidity and high-traffic spots. Treat the lacquer as the finish: clean it with a damp cloth, not with abrasive brass polish, which will cut through the coating and let the metal darken unevenly.
How fast can I get the Pass & Seymour SB-4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour SB-4 come with a warranty?
Absolutely. The Pass & Seymour SB-4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour SB-4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour SB-4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.