PDQ 11 Cast Pull 5-1/2" CTC

PDQ 11 Cast Pull 5-1/2" CTC

Commercial Door Pulls, Single and Back to Back Mount

PDQ door pulls mount on the pull side of a door and come in round straight, flat straight, cast and offset pull handle styles, with center-to-center spacing from 5-1/2" up to 12" depending on the model.

Single pulls and back to back models are offered, with thru bolt, surface concealed and back to back mounting types for 1-3/4" metal, composite or wood doors and 1/2" glass doors. Pulls are often specified with a PDQ push plate on the opposite face so both sides of the door get matching hardware without lock trim.

Key Features

• Round straight pulls in 5/8", 3/4" and 1" diameters, plus 1" flat straight, cast and 1" round offset pull handle styles
• Single mount and back to back mount models
• ADA H3 models with 2-1/2" hand clearance for accessible operation
• Thru bolt mounting for metal, composite or wood doors, with decorative head options for wood, metal and glass doors
• Surface concealed mounting for metal doors (standard or rivnut) and for wood doors (knife thread insert)
• Heavy duty 5/16" fasteners available on select 1" diameter pulls
• Finish availability varies by model

Technical Specifications

• Door thickness: Mounting types for 1-3/4" metal/composite/wood doors and 1/2" glass doors
• Manufacturer Part Number: 11

Available Options

• Finish: 605 - Bright Brass, 606 - Satin Brass, 612 - Satin Bronze, 613E - Dark Oxidized Satin Bronze, 628 - Satin Aluminum
• Also selected when ordering: Mounting, Heavy Duty Fasteners

Each configuration has its own PDQ part number, for example 11605.

Typical Applications

• Doors that do not need locking
• Interior doors
• Restrooms
• Storage rooms
• One-way traffic doors

Frequently Asked Questions

When should a pull be used instead of a lockset?
Push plates and pulls suit doors that do not need locking, such as interior doors, restrooms, storage rooms or one-way traffic doors where only an open and close function is required. PDQ pulls mount on the pull side and are often specified as a matched set with a push plate on the push side.

Does PDQ offer ADA pulls?
Yes. PDQ offers ADA-oriented options, including the H3 pull with 2-1/2" hand clearance for accessible operation. Recommended mounting follows ADA/ANSI A117.1 guidance, with pulls at 42" above finished floor and a minimum 4" clearance between the pull and the door stile.