You may also like
Klein Tools D203-7 Pliers, Needle Nose Side-Cutters, 7-Inch
Model: KLN-D203-7
Pliers, Needle Nose Side-Cutters, 7-Inch
Features
Hot-riveted joint ensures smooth action and no handle wobble
Slim head design for working in confined areas
Curved handles provide greater tool...
Klein Tools
$90.31
$40.31
Klein Tools D203-8-INS Long Nose Pliers, Insulated, 8-Inch
Model: KLN-D203-8-INS
Long Nose Pliers, Insulated, 8-Inch
Warnings
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Always inspect your tools before use...
Klein Tools
$147.40
$97.40
Klein Tools D203-8N-INS Insulated Long Nose Pliers, Side-Cutting/Stripping
Model: KLN-D203-8N-INS
Insulated Long Nose Pliers, Side-Cutting/Stripping
Warnings
Wear approved eye protection.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because...
Klein Tools
$149.00
$99.00
Klein Tools D203-7C Pliers, Needle Nose Side-Cutters with Spring, 7-Inch
Model: KLN-D203-7C
Pliers, Needle Nose Side-Cutters with Spring, 7-Inch
Features
Spring-loaded action for self-opening
Slim head design for working in confined areas
Curved handles provide greater tool...
Klein Tools
$96.96
$46.96
Pliers, Long Nose Side-Cutters, Insulated, 7-Inch
D203-7-INS - spec sheet
Warnings
- Wear approved eye protection.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
Features
- Forged in the USA with custom, US-made tool steel for maximum durability
- Curved handles provide greater tool control
- Integral guards help prevent hand contact with conductive parts
- Flame Retardant and Impact Resistant Handle
- A flame retardant, impact-resistant, bright orange outer coating
- Two layers of insulation provide protection against electric shock
- Needle Nose Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
D203-7-INS - spec sheet
Manufacturer Resources
Product Specs
- Cut Style:
- Side-Cutting
- Cutting Knives:
- Standard
- Depth:
- 7.3750 in
- Handle Color:
- Orange
- Handle Finish:
- 2-Layer Insulation
- Handle Length:
- 3.87" (9.8 cm)
- Height:
- 0.3750 in
- Insulated:
- Yes
- Jaw Length:
- 2.43" (6.2 cm)
- Jaw Thickness:
- 0.375" (1 cm)
- Jaw Width:
- 0.688" (1.7 cm)
- Joint Type:
- Hot-Riveted
- Knife Length:
- 0.572" (1.5 cm)
- Material:
- Induction Hardened Steel
- Overall Length:
- 7.37" (18.7 cm)
- Point Diameter:
- 0.094" (0.24 cm)
- Standard:
- IEC 60900 and ASTM F1505
- Type:
- Long Nose Side Cutting Pliers
- Weight:
- 0.3000 lbs
- Width:
- 1.0000 in