Square D PowerLogic PM8000 Pow...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12,220.33
Square D PowerLogic PM8000 Power Quality Meter, Standard, with Transducer and Remote Display

Square D PowerLogic PM8000 Power Quality Meter, Standard, with Transducer and Remote Display

(No reviews yet) Write a Review

Model: METSEPM8244

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12,220.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D PowerLogic PM8000 Power Quality Meter, Standard, with Transducer and Remote Display

The Square D PowerLogic PM8000 series is a compact, cost-effective multifunction power quality meter built to help you ensure reliability and efficiency in power-critical commercial and industrial facilities. This Standard variant pairs a DIN rail meter device with a remote display and transducer, is rated 100-690 V AC between phases (57-400 V AC phase-to-neutral, 42...69 Hz), and carries an IP30 enclosure rating conforming to IEC 60529. Line rated current options of 1 A, 5 A, and 10 A support a range of metering configurations, while cULus and CE certifications back it for professional installations.

Key Features

  • Comprehensive Power Quality Monitoring: displays power, energy consumption, current, frequency, harmonic distortion, and voltage for complete electrical network visibility.
  • Multiple Communication Protocols: supports Modbus TCP/IP, Modbus RTU (115 kbauds, 2-wire), IEC 61850, DNP3, and Ethernet Modbus TCP/IP daisy chain (10/100 Mbit/s) for flexible integration with building and power management systems.
  • Wide Voltage Range: rated 100-690 V AC between phases and 57-400 V AC phase-to-neutral, 42...69 Hz, suited to commercial and industrial power systems.
  • Line Rated Current: 1 A, 5 A, or 10 A current inputs to match transducer and CT configurations.
  • DIN Rail Mounting with Remote Display: DIN rail meter device pairs with a framework-mounted remote display for flexible clip-on or flush-mounted panel installation.
  • IP30 Enclosure Rating: conforming to IEC 60529 for protection against solid foreign objects.
  • Installation Category III: isolation voltage III 400-690 V conforming to EN/IEC 61010-1, ed. 3.
  • Data Recording and Cybersecurity: includes event logs, waveform logs, harmonics logs, sag and swell logs, plus port hardening and password protection.

Certifications & Compliance

  • cULus Listed
  • CE Marked
  • N998
  • Conforms to IEC 62053-24, IEC 62053-22, IEC 62052-11, IEC 61557-12, IEC 61326-1, and IEC 62586-2
  • IEEE 1588 time synchronization support
  • IEEE 519-2014 and EN 50160:2010 power quality compliance reporting

Technical Specifications

  • Range: PowerLogic
  • Variant: Standard
  • Provided Equipment: Remote Display
  • Compatibility Code: PM8244
  • Installation Category: III
  • Operating Altitude: 9842.52 ft (3000 m)
  • Ambient Air Temperature For Storage: -40-85 °C
  • Average Life Duration: 15 year(s)
  • Serviceability: Yes
  • Returnability: Yes
  • Recyclability: Product designed for enhanced end-of-life management and recycling
  • With Recycled Cardboard: Yes
  • ROHS Eur In Scope: Yes
  • China ROHS In Scope: Yes
  • WD Status: 1 - GSC certified
  • Weee Label: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Typical Applications

  • Commercial and Industrial Power Monitoring
  • Energy and WAGES Metering
  • Building Cost Management and Sub-Feeder Billing
  • Panelboard and Switchgear Power Quality Analysis
  • Load Studies and Infrastructure Expansion Planning

Why Square D?

Square D backs the PowerLogic PM8000 series with cULus and CE certification, robust cybersecurity features like port hardening and password protection, and compliance with recognized IEC and IEEE metering standards. Its DIN rail construction, remote display, and multi-protocol communication make it a dependable choice for professionals who need fast access to timely, critical power quality and energy data across industrial and commercial facilities.

Manufacturer Resources

Product Specs

Product Type:
Energy Meter
Series:
PowerLogic PM8000
Listing:
cULus
Voltage Rating:
100-690V
Configuration:
DIN Rail Mount
Department:
Electrical
Product Group:
Power Distribution
Product Subgroup:
Energy Monitoring

Square D METSEPM8244 – Frequently Asked Questions

1) Will the Square D PowerLogic PM8244 work on a 480V or 600V three-phase system?
Yes. The PM8244 power quality meter is rated 100-690 V AC between phases and 57-400 V AC phase-to-neutral at 42 to 69 Hz, so 480V and 600V three-phase services are both inside its direct voltage range. It is also rated Installation Category III with isolation voltage III 400-690 V per EN/IEC 61010-1 ed. 3, which is the category you want for distribution-level switchgear and panelboard connections rather than downstream branch circuits.
2) What CT secondary current does the PM8244 meter accept?
Line rated current options are 1 A, 5 A, and 10 A, so it pairs with standard 5A-secondary CTs as well as 1A secondaries common on IEC-specified gear. Match the current input to the CT secondary already installed on your feeder rather than the primary rating.
3) Does the PM8244 mount in the panel door or on DIN rail?
Both, and that's the point of this configuration. The metering device itself is DIN rail mounted inside the enclosure, and it ships with a separate remote display that mounts to a framework for clip-on or flush panel mounting. That lets you keep the meter body on rail next to the CT terminations and put the readout where an operator can reach it. If you need an all-in-one display-on-the-meter unit, this is not that build.
4) Can the PowerLogic PM8000 meter tie into an existing Modbus or BACnet-style building management network?
It speaks Modbus TCP/IP, Modbus RTU (115 kbaud, 2-wire), IEC 61850, and DNP3, and the Ethernet port supports Modbus TCP/IP daisy chaining at 10/100 Mbit/s. The daisy chain matters on a switchgear lineup with several meters, since you can loop meter to meter instead of running a home run to a switch for each one. It also supports IEEE 1588 time synchronization, which is what you need for time-aligned sag and swell records across multiple meters.
5) Can I use the PM8244 to prove harmonic compliance to IEEE 519?
Yes. The meter does power quality compliance reporting to IEEE 519-2014 and EN 50160:2010, and it logs harmonics along with events, waveforms, and sag and swell data on board. That covers the typical utility dispute or VFD harmonic study where you need recorded evidence at the service entrance rather than a one-time handheld capture.
6) What exactly ships with the Square D METSEPM8244, and what do I still have to buy?
The METSEPM8244 is the Standard variant of the PM8000 series and comes as the DIN rail meter device with a remote display and transducer. Current transformers are not part of the meter itself, so you specify CTs to suit your feeder and match the meter's 1 A, 5 A, or 10 A input. You also supply the DIN rail, control power wiring, and the communication cable for whichever protocol you're using.
7) Can this meter be used for tenant sub-billing in a multi-tenant building?
That's one of its intended uses. The PM8000 series is applied to energy and WAGES metering, building cost management, and sub-feeder billing, and it measures power, energy consumption, current, frequency, harmonic distortion, and voltage. For a property manager putting meters on tenant feeders, the remote display lets the readout sit outside the gear while the meter stays on DIN rail inside it.
8) Does the PowerLogic PM8000 have cybersecurity features for a networked facility?
It includes port hardening and password protection. On a meter that sits on the same Ethernet segment as a building management system, port hardening lets you shut unused services so the meter is not an open path onto the network. That is usually the first question an institutional or government IT group raises before allowing a new device on the plant LAN.
How fast can I get the Square D METSEPM8244 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D METSEPM8244 come with a warranty?
Absolutely. The Square D METSEPM8244 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D METSEPM8244?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D METSEPM8244 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!