Pro-Lok - 7-5/8-x-1-5/8 Mortise Side Prep

No. The Pro-Lok wrap around edge guard with mortise hinge cutout is built for 1-3/4 inch thick doors only. On a 1-3/8 inch door the wrap will stand off the faces and the lock prep will not line up. 1-3/4 inch is the standard commercial door thickness, so most metal and commercial wood doors take it; older interior residential doors at 1-3/8 inch do not.

It is prepped for a 2-3/4 inch backset, which is the common commercial backset. If the existing door is bored at 2-3/8 inch, the cutouts in this wrap will not line up with the lock.

That is what it is for. The Pro-Lok wrap around edge guard covers a split or torn lock edge on wood or metal doors and reinforces it against another forced entry, and it includes a mortise hinge cutout so it can be fitted where a mortise hinge sits rather than forcing you to cut the plate.

Overall the wrap measures 5 x 12 inches. The face plate portion is 1-1/2 x 8 inches and the side prep on the door edge is 1-5/8 x 7-5/16 inches. Check that nothing on the door, such as a viewer, closer arm bracket or hinge leaf outside the mortise cutout, falls inside that 5 x 12 inch footprint.

Residential, commercial and industrial openings are all within its stated use. The limiting factors are the door itself, 1-3/4 inch thick wood or metal, and a 2-3/4 inch backset lock prep, not the building type.

The cutout in this wrap is sized for a mortise hinge, the kind let into the door edge. On a door with surface applied or continuous hinges the cutout will not correspond to anything, though the wrap can still go on if the hinge hardware sits clear of the 5 x 12 inch area the plate covers.

Two: stainless steel and duronodic. Stainless is the usual pick where the rest of the door hardware is bright or satin chrome, duronodic where the openings run dark bronze. For a property manager standardizing a building, pick the one that matches the existing lock trim since the wrap sits right against it.