Pro-Lok - 4-7/8" x 1-1/4" Filler Plate

The Pro-Lok EFP-110-PC filler plate covers leftover strike cutouts in a door or a door frame. When you swap locks or move a strike, the old mortise is left open, and this plate closes it off so the opening looks finished and there is no exposed cavity. It measures 4-7/8 x 1-1/4 inches and comes with mounting hardware.

At 4-7/8 x 1-1/4 inches, it matches the footprint of a common strike prep, which is the size range of a typical ANSI strike mortise in a frame or a lock strike pocket. Measure your existing cutout first: the plate only conceals a cutout that falls inside 4-7/8 by 1-1/4 inches. Anything longer or wider than that will show around the edges.

Both. The plate is made to go on wood or hollow metal doors, and it works on frames as well as door faces. Fasteners are included, so on hollow metal you are screwing into the existing strike prep holes or drilling fresh ones in the metal.

It ships primed, not finish coated. Plan on painting it to match the door or frame. That is usually what you want on a repair anyway, since a primed plate takes topcoat and can be blended into the surrounding paint instead of sitting there as a mismatched metal patch.

No. Mounting hardware is packed with the plate, so nothing extra is required to install it beyond a screwdriver and, on metal, possibly a drill if the old holes do not line up.

It is catalogued as a residential item, and the description covers standard commercial or residential doors, so it suits apartment and multi-family unit doors as well as light commercial openings. For a high-traffic fire rated commercial opening, note that no fire rating is carried on this plate, so on a labeled door use a repair method your inspector accepts.

Bulk poly bag, which is how it ships for shops and maintenance crews patching a lot of openings rather than one door. Handy if you are rekeying or standardizing hardware across a building and expect a stack of orphaned strike cutouts.