Pro-Lok - Blue Punch Key Machine

The Blue Punch is a code cutting machine, not a tracer. Instead of following the pattern of an existing key, it punches each cut to the factory space and depth for that keyway, so what comes out is an original-quality key rather than a copy of a copy. It's built to do that at duplicator speed, which is why locksmiths keep one on the truck for rekey and lost-key work where there's no good key to trace.

Four versions are sold, each dedicated to one keyway family: Kwikset, Schlage Classic, Schlage Everest D, and MX Alpha. You pick the one matching the cylinders you service. A Blue Punch bought for Kwikset cuts Kwikset, so a shop covering both Kwikset and Schlage residential and commercial work needs more than one unit.

No. Schlage Classic and Schlage Everest D are ordered as separate Blue Punch machines. Everest uses a different keyway with an undercut check pin feature, so the Classic unit is not a substitute. If your building is on Everest restricted keys, order the Everest D version specifically.

Yes, that's its main advantage over a duplicator. Duplicating needs a key to trace. The Blue Punch cuts from the code, so once you've read the bitting off the cylinder by decoding or disassembly, you punch a working key with no original in hand. Same for cutting a fresh set after a rekey to new bittings.

No setup on your end. Each Blue Punch is configured at the factory for the keyway it ships for, so spacing and depth are automatic. You read the code, set the cuts, and punch. That's what makes it usable by a maintenance tech who isn't a full-time key cutter, not just a bench locksmith.

It's rated for commercial use and it's the kind of tool a property manager's in-house shop can run. Because there is no calibration to hold and no wheel to dress, cutting a key to code is a repeatable operation. For a portfolio standardized on one keyway, say Kwikset across apartment doors, one machine covers turnover rekeys without sending work out.

The Blue Punch is a manual punch, not a motorized cutter, so there's no cord and no motor to run. That's the practical argument for it on a service van or in a job trailer where you're rekeying units and there's no reliable outlet.

There is a dedicated MX Alpha version of the Blue Punch. Order that one by its function rather than assuming a Kwikset or Schlage unit covers it, since each machine is keyway specific.