You may also like
Replacement Blades and Bit for Adjustable Hole Saw 53710
53701 - spec sheet
Warnings
- Always wear approved eye protection.
- Use light pressure when cutting and hold the drill with both hands.
- Always wear approved respiratory protection.
- Never use on or near live electrical circuits.
- Read and follow safety instructions in power tool owners manual.
Features
- Using the large hex key, remove and replace end screw, washers, and blade
- Integrated Gears
- Features integrated gears for easy blade adjustment and centered pilot bit
- Using the small hex key, remove and replace pilot bit set screw and pilot bit
- After replacing, ensure all screws are fully seated and snug-tight before using the Adjustable Hole Saw with Auto-Set Arms to cut drywall or ceiling tile
- Replacement kit comes with 2 blades, 1 pilot bit, 2 hex keys, 4 washers, 2 end screws and 1 set screw
- The Adjustable Hole Saw with Auto-Set Arms provides smooth cuts from 2 to 7-Inches (5.1 to 17.8 cm) in drywall and ceiling tile
- Replacement blades and bit for the Adjustable Hole Saw with Auto-Set Arms (Cat. No. 53710)
53701 - spec sheet
Manufacturer Resources
Product Specs
- Country Of Origin:
- China
- Depth:
- 1.0000 in
- For Use With:
- 53710 Adjustable Hole Saw with Auto-Set Arms
- Height:
- 2.5200 in
- Includes:
- (2) Blades, (1) Pilot Bit, (2) Hex Keys, ( 4) Washers, (2) End Screws, (1) Set Screw
- Material:
- Steel
- Overall Height:
- 2.52" (6.4 cm)
- Overall Length:
- 1" (2.5 cm)
- Overall Width:
- 0.19" (0.5 cm)
- Shaft Length:
- 1.56" (4 cm)
- Size:
- 3/16"
- Tip Type:
- Regular-Point
- Type:
- Replacement Parts
- Weight:
- 0.0700 lbs
- Width:
- 0.1900 in