You may also like
RING TERM 22-16 AWG NO6 BOLT
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- General Terminals
- Product Type:
- Non-Insulated Ring Terminal
- Replacement Product Id New :
- 7TAI029620R0009
- Standards:
- UL E9809
- Wire Size:
- 22-16 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Material:
- Copper
Sta-Kon A433 – Frequently Asked Questions
1) What wire gauge range does the Sta-Kon A433 ring terminal take?
The A433 is sized for 22 to 16 AWG stranded wire. If your conductor is 14 AWG or larger, this barrel won't crimp down on it properly, and you'll need the next size up in the Sta-Kon ring terminal range.
2) Is the Sta-Kon A433 insulated or bare?
Bare. It's a non-insulated copper ring terminal, so the crimp barrel is exposed. On panel work where you need strain relief or color-coded insulation at the barrel, use an insulated ring terminal instead, or sleeve the A433 with heat shrink after crimping.
3) Is the A433 terminal UL listed?
It carries UL file E9809. That's the reference an inspector or submittal reviewer will want for a terminal going into a listed assembly.
4) Will a copper ring terminal like the A433 work on aluminum conductors?
No. The A433 is a copper terminal and is intended for copper wire in the 22-16 AWG range. Aluminum conductors need a terminal rated AL or AL9CU with the appropriate inhibitor compound.
5) Does the A433 have a current part number if it was superseded?
Yes, the A433 is cross-referenced to replacement product ID 7TAI029620R0009. If your drawing or BOM calls out the legacy A433, that number is the same item in the current numbering scheme.
6) Should I use a ring terminal or a fork terminal on a #6 screw?
A ring like the A433 has to come off the stud entirely to be removed, but it cannot vibrate loose off the screw, which is why it's specified for motor leads, grounds, and anything subject to movement. A fork or spade slides out under a loosened screw, so it's faster for service work on dense terminal strips. For a #6 stud carrying 22-16 AWG where reliability beats speed, the ring is the right choice.
7) Is the Sta-Kon A433 made in the USA for Buy American jobs?
Country of origin is the United States, which is what a government, school district, or federally funded project needs for domestic-content documentation.
How fast can I get the Sta-Kon A433 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon A433 come with a warranty?
Absolutely. The Sta-Kon A433 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon A433?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon A433 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.