Rockwood BF158 Barrier Free 90...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$214.63
$195.80
Rockwood Rockwood BF158 Barrier Free 90-Degree Offset Door Pull, 12" CTC ROC-BF158

Rockwood BF158 Barrier Free 90-Degree Offset Door Pull, 12" CTC

(No reviews yet) Write a Review

Model: BF158 US26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$214.63
$195.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
ROCKWOOD BF158 90�� Offset Door Pulls

Material: Aluminum, brass, bronze, stainless steel;

Finishes: Available in standard architectural finishes;

Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door);

Features: Recommended for ADA openings;

Options:

  • Back to back mounting in pairs — use BTB suffix and mounting type number (BF156BTB16)
  • Concealed mounting single pulls — use C suffix and mounting type number (BF156C17)
  • Advise if door thickness is other than 1-3/4"
  • Heavy duty versions of most fastening types available — use suffix HD to fastening type number (BF156BTB16HD)
  • See page B27 for mounting selection (standard duty 1/4 - 20)
 
ROCKWOOD OVERVIEW
 
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
 
ENVIRONMENTAL MANAGEMENT

ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.

 
 
RESOURCES & DOWNLOADS

Rockwood full line catalog

Manufacturer Resources

Product Specs

Subcategory:
Push and Pull Plates, Door Pulls
Product Group:
Door Trim and Accessories
Clearance:
2-1/2"
Fasteners:
1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door)
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
ANSI/BHMA:
ANSI A156.6, J402
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Product Model:
BF158
(CTC) Center-to-Center:
12"
Product Projection:
3-1/2"
Product Category:
Door Trim and Accessories
Product Substrate:
Aluminum, Brass, Bronze, Stainless Steel
Department:
Door Hardware

Rockwood BF158 US26D – Frequently Asked Questions

1) How far does the BF158 pull stick out from the door face?
Projection is 3-1/2 inches overall, with 2-1/2 inches of that being open clearance between the grip and the door. That matters in a corridor or a vestibule where the door swings toward a wall or a second leaf, and it matters where the pull shares a stile with a push bar or a card reader. Mounting holes are 12 inches center to center.
2) Does the Rockwood BF158 pull come with mounting hardware, and what door thickness is it set up for?
Standard fasteners are 1/4-20 x 2-1/4 inch thru bolts with finish washers, sized for a 1-3/4 inch door, which is the usual commercial thickness. If your door is anything other than 1-3/4 inches, that has to be called out when the order is placed so the correct fastener length ships. Thru bolting is what you want on an aluminum or hollow metal door where wood screws would pull out.
3) Can I mount BF158 pulls back to back on both sides of the same door?
Back to back mounting in pairs is an ordering option on the Barrier Free pulls, specified with the BTB suffix plus the mounting type number. For a single pull with no exposed fasteners on the reverse face, order concealed mounting with the C suffix and the mounting type number instead. Heavy duty versions of most fastening types are available by adding HD to the fastening type number.
4) What is the closest alternative to the Rockwood BF158 offset pull for an ADA opening?
The Rockwood BF158 is a 90-degree offset pull with 12 inch center-to-center spacing, a 2-1/2 inch clearance and a 3-1/2 inch projection, and it is recommended for ADA openings. The Ives 8145EZHD is the nearest cross-brand equivalent: a 45 degree offset door pull described as ADA compliant with heavy duty mounting hardware. Both are offset pulls that hold the hand away from the door face, so the practical difference is the offset geometry - the BF158 turns the grip a full 90 degrees off the door, while the 8145EZHD breaks at 45 degrees. If the drawing calls out a specific offset angle, match on that.
5) What should I use instead of the Rockwood BF158 when the opening needs a straight pull rather than an offset one?
The BF158 is an offset-hung pull, so the grip sits off the plane of the door. When the opening calls for a straight bar instead, the Ives 8102HD is a heavy duty straight door pull with a 3/4 inch round bar and 1-1/2 inch clearance, and the Ives 8103HD is a heavy duty straight pull in 1 inch round with through bolt mounting. The ABH AB3300 is a straight flat end pull handle in 1.00 inch diameter for commercial doors. Straight pulls give less knuckle clearance than the BF158's 2-1/2 inch, which matters on doors where a gloved hand or a full grip is expected.
6) Can a Deltana offset pull replace a Rockwood BF158 on a commercial door?
Check door thickness first. The Rockwood BF158 ships with 1/4 - 20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door, which is the thickness of a typical commercial door. The Deltana OHP620 off-set handle pull is a back-to-back set listed for a door thickness range of 1-1/8 inch to 1-3/8 inch, which stops short of a 1-3/4 inch leaf. The Deltana SSPOBB24 and SSPORBB24 are both 24 inch back-to-back offset pulls, so they are pull-and-pull sets in a much longer size rather than a 12 inch center-to-center single. For a 1-3/4 inch commercial opening the BF158 is the one dimensioned for it.
7) What finishes does the Rockwood BF158 offset pull come in?
Four: 626 satin chrome, 628 satin aluminum clear anodized, 630 satin stainless steel, and 313 dark bronze anodized aluminum. Pick 630 to match stainless push plates and stainless exit device trim, 628 to match a clear anodized storefront, and 313 for a dark bronze storefront. Base material across the line is aluminum, brass, bronze or stainless steel depending on finish.
8) Is the Rockwood BF158 heavy enough for a high traffic school or hospital door?
It is a commercial grade pull conforming to ANSI A156.6, J402, and Rockwood pulls are used on institutional, educational, detention, healthcare-type and hospitality buildings. Mounting is thru bolt with 1/4-20 hardware rather than surface screws, which is what holds up under constant pulling. For the highest abuse openings, heavy duty versions of most fastening types can be ordered by adding the HD suffix to the fastening type number.
9) Is a push plate an acceptable substitute for a Rockwood BF158 door pull?
No - they do opposite halves of the opening. The BF158 is a pull, gripped to draw the door toward you, built to ANSI A156.6 J402 with a 2-1/2 inch clearance behind the grip. A Trimco 1001-1 heavy duty push plate at 3 inch by 12 inch and a Trimco 1041 half-round push plate at 8 inch by 16 inch are flat plates fixed to the door face for the push side; there is nothing to grip. On a swing door the usual arrangement is a pull on one face and a push plate on the other, so these are commonly ordered together with the BF158 rather than in place of it. The Trimco 1070 series classic push/pull plates at 3-1/2 inch by 15 inch combine both functions on plates.
10) Which offset pulls from other manufacturers are direct competitors to the Rockwood BF158?
Among commercial offset pulls, the ABH AB3310 is an offset flat end door pull handle for surface mount commercial grade, and the ABH AB3330 is an offset round end pull offered with custom length options. The Ives 8169 is a C style offset solid door pull in 1 inch diameter with heavy duty mounting. The Rockwood BF158 is specified at 12 inch center-to-center with a 3-1/2 inch projection and is available in aluminum, brass, bronze and stainless steel. Where a job calls for a length the standard catalog does not cover, the AB3330 custom length option is the one to look at; where the spec names a fixed 12 inch CTC, the BF158 is already dimensioned to it.
11) What is the difference between the Rockwood BF158 and a Cal-Royal PUL-175 night latch pull?
They solve different problems. The Rockwood BF158 is a 90-degree offset door pull at 12 inch center-to-center with a 3-1/2 inch projection, thru bolted through the door with 1/4 - 20 x 2-1/4 inch fasteners. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch in height, in stainless steel - a short pull that mounts around a rim cylinder so the cylinder and the grip occupy the same prep, typically on a storefront or exit door. If the door has a rim cylinder that the pull has to accommodate, the BF158 is not the part; if it is a straightforward pull-side grip on a full-height opening, it is.
12) I need an all stainless steel pull instead of the Rockwood BF158 - what are my options?
The BF158 itself is offered in a 630 satin stainless steel finish and is made in aluminum, brass, bronze and stainless steel, so a stainless BF158 is available in the same 12 inch center-to-center offset form. If the requirement is a solid stainless straight pull, the ABH AB7200 is a solid stainless steel flat end pull handle at 7/8 inch diameter with through-bolt mounting, and the Ives 8103HD is a heavy duty 1 inch round straight pull with through bolt mounting. The trade-off is geometry: the AB7200 and 8103HD are straight, so you give up the BF158's 90-degree offset and its 2-1/2 inch clearance.
13) For a high traffic restroom door, is the Rockwood BF158 the right pull or is there a better fit?
The BF158 works as a commercial restroom pull - it is a commercial-rated offset pull built to ANSI A156.6 J402 with 2-1/2 inch clearance, recommended for ADA openings, and it thru bolts through a 1-3/4 inch door rather than surface screwing. If the goal is a pull designed specifically around restroom use, the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull in the 1035 series intended for that opening. The choice usually comes down to whether the facility is standardizing on one offset pull across all doors, where the BF158 in a consistent 626 satin chrome or 630 satin stainless keeps the whole fleet matching.
14) What replaces the Rockwood BF158 when I need a matched pull on both faces of the door?
The BF158 can be ordered for back to back mounting in pairs using the BTB suffix with the mounting type number, so the same pull can serve both faces of a 1-3/4 inch door. If you are sourcing a back-to-back set outright, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set and the SSPORBB24 is the round offset version at the same 24 inch length, while the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set. The Deltana SSP1210 is a 12 inch contemporary pull for a single side only, so it does not cover a two-face opening on its own.
15) I need to standardize pulls across a building. Can I get the BF158 in matching finishes on every opening?
Yes, and the finish list is short enough to standardize on cleanly: 626 satin chrome, 628 satin aluminum clear anodized, 630 satin stainless steel, and 313 dark bronze anodized aluminum. All are standard architectural finish numbers, so a 630 pull will read the same as 630 push plates and 630 lock trim elsewhere in the building. Every opening gets the same 12 inch CTC prep and the same 1/4-20 x 2-1/4 inch thru bolt hardware for a 1-3/4 inch door, so one prep detail covers the whole job.
How fast can I get the Rockwood BF158 US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood BF158 US26D come with a warranty?
Absolutely. The Rockwood BF158 US26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood BF158 US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Rockwood BF158 US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!